MX-M260, MX-M260N, MX-M260FG, MX-M260FP (serv.man2). Updated Handy Guide. - Sharp Copying Equipment Handy Guide. Page 19

 

 

 

19 

Main 

Sub 

Contents 

22 

02 

Used to check the total numbers of misfeed and troubles. (When 
the number of misfeed is considerably great, it is judged as 
necessary for repair. The misfeed rate is obtained by dividing this 
count value with the total counter value.) 

03 

Used to check the misfeed positions and the number of misfeed at 
each position.  (When the number of misfeed is considerably great, 
it can be judged as necessary for repair.) 

04 

Used to check the total trouble (self diag) history. 

05 

Used to check the ROM version of each unit (section). 

06 

Used to print each key operator setting, the account information, 
and the machine adjustment values. 

07 

Used to display of the administrator password. 

08 

Used to display the original, staple counter. 

09 

Used to check the number of use of each paper feed section. (the 
number of prints) 

10 

Used to check the system configuration. 

11 

Used to display the FAX send/receive counter (FAX reception and 
print counter). 

12 

Used to check the misfeed positions and the number of misfeed at 
each position. (When the number of misfeed is considerably great, 
it can be judged as necessary for repair.) 

13 

Used to display the CRUM type. 

19 

Used to display the scanner counter in the network scanner mode. 

24 

01 

Used to clear the misfeed counter, the misfeed history, the trouble 
counter, and the trouble history. (The counters are cleared after 
completion of maintenance.) 

02 

Used to clear the number of use (the number of prints) of each 
paper feed section. 

03 

Used to clear the number usage data of the stapler, RSPF, and 
scanning. 

04 

Used to reset the maintenance counter. 

05 

Used to reset the developer counter. (The developer counter of the 
DV unit which is installed is reset.) 

06 

Used to clear the copy counter. 

07 

Used to clear the OPC drum (membrane decrease) correction 
counter. (This simulation is executed when the OPC drum is 
replaced.) 

09 

Used to clear the printer counter and other counters. 

10 

FAX counter data clear 

15 

Used to clear the scanner counter in the network scanner mode. 

25 

01 

Used to check the operation of the main drive (excluding the 
scanner section) and to check the operation of the toner 
concentration sensor. (The toner concentration sensor output can 
be monitored.)