• Service Manuals |
  • Sharp |
  • Printer |
  • MX-M260, MX-M260N, MX-M260FG, MX-M260FP (serv.man2)

MX-M260, MX-M260N, MX-M260FG, MX-M260FP (serv.man2). Updated Handy Guide. - Sharp Copying Equipment Handy Guide

mx-m260, mx-m260n, mx-m260fg, mx-m260fp (serv.man2) handy guide
Model
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man2)
Pages
32
Size
941.69 KB
Type
PDF
Document
Handy Guide
Brand
Device
Copying Equipment / Updated Handy Guide.
File
mx-m260-mx-m260n-mx-m260fg-mx-m260fp-sm2.pdf
Date
Next: Sharp MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man3) Service Manual

Read Sharp MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man2) Handy Guide online

 
 
SHARP 
 
 
 
     
 
MX-M260
MX-M310
(Andromeda II Refresh)
Technical Handy Guide
April 2013   
 
 
 
2 
 
The information contained within this guide is subject to change without prior notice.  
This Handy Guide is not a substitute for the official Sharp service manuals. 
It is for use by Sharp qualified service technicians with the intention of improving 
the efficiency of Sharp MFP Devices. 
 
All the latest fault finding information, firmware and printer drivers 
can be found on the                       Support Website 
 
www.tradenet.sharp.co.uk/tech
 
 
 
Product Key Registration Web Site 
https://dse-pub.sharp.co.jp/key/
 
Username:  keyuser 
Password:  key000323 
 
 
 
 
 
 
 
 
 
 
 
SHARP ELECTRONICS (UK) LTD. 
Document Solution’s Support Centre 
 
 
 
 
 
 
3 
Contents 
 
Section  
Page 
1 Machine 
Specification 
4 
2 Machine 
Options 
6 
3 Consumables 
7 
4 
Initial Setup Procedure 
8 
5 Maintenance 
9 
7 
Coin Vend Interface 
11 
8 Product 
Key 
Registration 
12 
9 
Firmware Upgrade Procedure 
14 
10 Test 
Simulations 
17 
11 Trouble 
Codes 
25 
12 Sensor 
Location 
28 
16 Notes 
29 
 
 
 
 
 
 
 
 
 
4 
Machine Specifications 
 
 MX-M260 
MX-M310 
General 
Type Desktop 
Original paper size 
Maximum A3 
Printed paper size 
Maximum A3 – Minimum A6R 
Standard paper capacity 
2 x 500 + MB(100) sheets 
Maximum paper capacity 
4 x 500 + MB(100) sheets 
Paper weight 
56 - 105 g/m2 (Bypass 56 - 200 g/m2) 
Output capacity 
A4 size: 500 sheets (Face down) 
Warm-up time 
23 seconds 
25 seconds 
Resolution 
600 dpi (Smoothing 1,200 dpi printer) 
Memory 
Std: 32 MB (Max 1,056 MB) 
Duplex Standard 
Copier 
Copy speed (A4 run) 
26 cpm 
31 cpm 
SOPM Yes 
E-Sort Standard 
First copy out time 
4.8 seconds 
4.5 seconds 
Continuous copy 
Maximum 999 
Scan resolution 
600 dpi 
Zoom range 
25% – 400% (50% - 200% using RSPF) 
Document feeder 
RSPF (MX-RP10) 
Original capacity 
100 sheets 
Scan speed (Copy / Scan) 
26 cpm / 31 opm 
27 cpm / 31 opm 
Finishing (Options) 
Job separator (MX-TR11) 
Inner Finisher (MX-FN13) 
Output capacity 
Upper: 100 sheets 
Lower: 500 sheets 
500 
Functionality - 
Max 50 sheets 
one-position staple 
SPLC Printer 
Standard 
Print speed (A4) 
26 ppm 
31 ppm 
PDL (Emulation) 
SPLC (GDI with JBIG compression) 
Interface USB 
2.0 
Memory N/A 
Supported OS 
Windows 2k/XP/Vista 
 
 
Page of 32
Display

Download Sharp MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man2) Handy Guide

Here you can read online and download Sharp MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man2) Handy Guide in PDF. MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man2) handy guide will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man2) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man2) Service Manuals

Preview DownloadPagesSize
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man3) Service Manual (Revised November 2014). Service Manual 127 10.65 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man4) Circuit Diagram. Service Manual 127 2.91 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man5) Installation Manual. Service Manual 39 6.6 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man8) Online Manual (For Printer). User Guide / Operation Manual 33 688.61 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man9) MX-PB12 Setup Guide. User Guide / Operation Manual 127 9.88 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man10) Software Setup Guide. User Guide / Operation Manual 20 908.03 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man11) Operation Manual. User Guide / Operation Manual 127 10.39 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man6) Parts Guide (Revised Feb 2015). Parts Guide 87 5.55 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man7) PWB Parts Guide (March 2012). Parts Guide 23 1.22 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man45) Correction to part number for Grease (Service Tools). Technical Bulletin 2 120.85 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man35) Manual paper feed roller material change. Technical Bulletin 5 342.3 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man44) Main Charger Case, Changes made. Technical Bulletin 3 147.58 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man43) Maintenance Tool Version Upgraded to 04.26. Technical Bulletin 1 12.95 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man42) Maintenance Tool Updated to Version 4.28. Technical Bulletin 1 31.72 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man41) Servicing improvement by changing shape of front and rear fuser pressure levers. Technical Bulletin 2 35.13 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man40) Pay extra attention to notes when installing cartridge guide AS. Technical Bulletin 3 277.49 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man39) Countermeasure for POD1 jam. Technical Bulletin 2 33.24 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man38) NEWLY-REGISTERED SERVICE PART WHICH ELIMINATES STATIC CHARGE FROM USB PORT ON MCU PWB Technical Bulletin 4 147.93 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man37) COUNTERMEASURE FOR DEVELOPER LEAKAGE FROM REAR SIDE OF DV UNIT. Technical Bulletin 1 14.04 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man36) MATERIAL CHANGE PAPER FEED SHEET Technical Bulletin 4 354.66 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man57) Maintenance software version upgrade (V04.22). Technical Bulletin 1 13.86 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man46) Disuse of a part and material change for better productivity. Technical Bulletin 1 38.74 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man47) Rom version upgrade (2, 3 and 4). Technical Bulletin 2 19.97 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man48) Changes in right delivery gate. Technical Bulletin 2 35.63 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man49) Standardization of the ozone filters and shape change of the left cabinet. Technical Bulletin 2 61.02 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man50) Increase of the power holding the right delivery switching gate in the MX-TE10. Technical Bulletin 2 35.8 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man51) Countermeasure against gear jumping in the 2nd delivery unit. Technical Bulletin 2 93.1 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man52) Countermeasure against F R magnification difference when scanning an image using the RSPF. Technical Bulletin 2 59.33 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man53) Rom version Upgrade (1). Technical Bulletin 2 16.82 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man54) PRECAUTIONS WHEN INSERTING A TONER CARTRIDGE Technical Bulletin 1 15.47 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man55) Disuse of the delivery fan connector sheet in the 1st delivery unit. Technical Bulletin 2 68.87 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man56) Discontinuation of the TR cushion in the transfer unit. Technical Bulletin 1 56.15 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man33) ENHANCEMENT OF ACTUATOR RETURN FOR MANUAL FEED PAPER EMPTY DETECTION. Technical Bulletin 3 316.53 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man34) Change of material for PS pressure holder and PS pressure knob. Technical Bulletin 2 241.63 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man24) Change of MG roller and bearing. Technical Bulletin 3 243.08 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man25) Change of cleaning blade. Technical Bulletin 2 143.42 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man26) Starting Powder List (This list takes priority over information in Service Manuals). Technical Bulletin 4 66.25 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man27) Updated HV PWB (Light prints copies). Technical Bulletin 2 433.7 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man28) IMPORTANT Handling of EEPROM's. Technical Bulletin 5 203.32 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man29) Change in shape of gate bracket attached on rear side of 1st delivery paper unit. Technical Bulletin 2 129.96 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man30) Change in material of pick up roller. Technical Bulletin 2 77.2 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man31) Noise from rear side of 1st delivery paper unit. Technical Bulletin 2 93.83 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man32) COUNTERMEASURE FOR NOISE CAUSED BY MATERIAL CHANGE OF THE MANUAL PAPER FEED ROLLER. Technical Bulletin 2 148.81 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man13) Maintenance Tool Version 4.28. Driver / Update 5.32 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man22) Maintenance Tool Version 04.22. Driver / Update 4.5 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man14) Maintenance Tool Version 04.26. Driver / Update 5.34 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man15) Maintenance Tool Version 04.24. Driver / Update 5.21 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man16) Boot Firmware (DSK Version) v30.10. Driver / Update 228.21 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man17) Boot Firmware (Non DSK) v1.10. Driver / Update 228.25 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man18) SAP Device Types for MX Mono devices. Driver / Update 3.18 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man19) Firmware Revision (2, 3 and 4) See Technical Bulletin DCE812. Driver / Update 1.59 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man20) Firmware Revision (1) See Technical Bulletin DCE788. Driver / Update 1.59 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man21) Firmware module allowing NIC speed to be set manually. (Contains ReadMe file). Driver / Update 683 B
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man23) Initial Firmware Revision ROM Control No. A00 MCU V01.10 IMC V05.00 OPE V01.00 PCL V01.00.00 Finisher V03.01 Driver / Update 1.57 MB
MX-M260 MX-M260N MX-M260FG MX-M260FP EEPROM Programming Procedure Handy Guide 4 772.27 KB
MX-M260 MX-M260N MX-M260FG MX-M260FP (serv.man12) How To Read A Main Machine Serial Number FAQ 1 16.5 KB

Random: