Read Sharp MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man2) Handy Guide online
23
Main
Sub
Contents
61
01
Used to check the LSU (polygon motor) operation. Check speed
can select 145mm/s or 122mm/s individually.
can select 145mm/s or 122mm/s individually.
63
01
Used to check the result of shading correction. The shading
correction data are displayed.)
correction data are displayed.)
07
Used to adjust the RSPF white correction start pixel position
automatically. This adjustment is performed after the lens unit is
replaced.
automatically. This adjustment is performed after the lens unit is
replaced.
64
01
Used to check the operation of the printer function (auto print
operation).
operation).
65
01
Used to adjust the touch panel (LCD display section) detection
position.
position.
02
Used to check the touch panel (LCD display section) detection
position adjustment result.
position adjustment result.
05
Used to check the key inputs of the operation panel.
66
01
Used to change and check the FAX-related soft SW.
02
Used to clear the FAX-related soft SW. (Except for the FAX
adjustment values)
adjustment values)
03
FAX PWB memory check
04
Signal send mode (Signal send level: Max.)
05
Signal send mode (Signal send level soft SW setting)
06
Printing the confidential password
07
Print the screen memory contents
10
Image data memory clear
11
Used to send 300bps signals. (Signal send level: Max.)
12
Used to send 300bps signals. (Signal send level: Set by soft SW)
13
Used to register the dial numbers.
14
Used to perform the dial test. (10 PPS send test)
15
Used to perform the dial test. (20 PPS send test)
16
Used to perform the dial test. (DTFM signal send test)
17
Used to check the DTFM signal send operation. (Signal send level:
Max.)
Max.)
18
Used to check the DTFM signal send operation. (Signal send level:
Set by soft SW.)
Set by soft SW.)
19
Used to write the SRAM data to the Flash ROM.
20
Used to write the Flash ROM data to the SRAM.
21
FAX information print
21
Handset sound volume adjustment (Japan only)
24
Used to clear the FAST storage data. (SEC only)
30
Used to set the TEL/LIU.
31
Used to set the TEL/LIU.
32
Receive data check
33
Signal detection check
34
Communication time measurement display
37
Speaker sound volume adjustment
41
CI signal check
52 Pseudo-ringer
check
Click on the first or last page to see other MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man2) service manuals if exist.