Read Sharp MX-M1055 / MX-M1205 (serv.man2) Service Manual online
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 9
D. Installation of operation panel unit
(Attention: Instal keyboad unit before Instration of operation panel)
1) Remove the following 7pcs of screws and slide Upper Cabinet
1) Remove the following 7pcs of screws and slide Upper Cabinet
Right Upper. (It need not be removed completely.)
(Special Instruction)
If the keyboard is attached (standard for N.A. and option for
Europe), this procedure has already been implemented in the
keyboard installation procedure (previous sheet) which is per-
formed in advance.
(Special Instruction)
If the keyboard is attached (standard for N.A. and option for
Europe), this procedure has already been implemented in the
keyboard installation procedure (previous sheet) which is per-
formed in advance.
2) Fix Panel Support UN (item No,14) with 5pcs of screws. (item
No,10 M4×8 S-Tite)
Hook the pawl-shaped items on the holes. (2 posi-
tions)
3)
Fix Right Cabinet Rear Middle with 1pc of screw (Item No.10 /
M4×8 S-Tite).
M4×8 S-Tite).
Hook the pawl-shaped items on the holes. (6 posi-
tions)
*Slide the cabinet from below upward and hook the pawls to
assemble.
*Slide the cabinet from below upward and hook the pawls to
assemble.
Glass
fixer right
Upper Cabinet Right Upper
Upper Cabinet Right Upper
Click on the first or last page to see other MX-M1055 / MX-M1205 (serv.man2) service manuals if exist.