Read Panasonic KX-TG1711CAB / KX-TG1711CAJ / KX-TG1712CAB / KX-TGA171RUB / KX-TGA171RUJ / KX-TG1711UAB / KX-TG1711UAJ / KX-TG1711UAW / KX-TGA171RUW / KX-TG1711RUB / KX-TG1711RUJ / KX-TG1711RUW Service Manual Supplement online
KX-TG1711AGB/KX-TG1712AGB/
KX-TGA171AGB/KX-TG1711LBB/
KX-TG1712LBB/KX-TGA171LBB/
KX-TG1711ARB/KX-TGA171EXB/
KX-TG1711MEB/KX-TG1712MEB/
KX-TGA171MEB/KX-TG1711LCB/
KX-TG1712LCB/KX-TGA171LCB/
KX-TG1711LAB/KX-TGA171LAB/
KX-TG1711CAB/KX-TG1711CAJ/
KX-TG1712CAB/KX-TGA171RUB/
KX-TGA171RUJ/KX-TG1711UAB/
KX-TG1711UAJ/KX-TG1711UAW/
KX-TGA171RUW/KX-TG1711RUB/
KX-TG1711RUJ/KX-TG1711RUW/
KX-TG1711GB/KX-TG1712GB
J: Beigr Version
W: White Version
2 REPLACEMENT PARTS LIST ---------------------------------2
Bahamas, Cayman Islands,
KX-TGA171RUJ
KX-TGA171RUJ/KX-TGA171RUW
KX-TGA171RUJ/KX-TGA171RUW
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
1. Improve performance
7: Correction
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
**The following items (V-Z) indicate the Interchangeability. See the "Notes" column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
New
Late (after
Use original parts until exhausted, then stock new parts.
early or late production sets. Use original parts where possible, then stock new parts.
Stock new parts.
late production sets only. Stock both original and new parts.
New
Late (after
New
Late (after
New
Late (after
See 8 Service Mode/8.1. Engineering Mode/8.1.1. Base Unit
2) Change value to "30303030" of address “02AB” to “02AE” and “02CD” to “02D0”.
3) Power off/on of base unit and handset.
You need to copy all batch files for Base unit to your PC. The folder should have
the same folder structure as CDROM like C:¥PNZZTG1611x¥01_Handset¥.....
To check all value in EEPROM, you need to install “Active Perl” in your PC.
To install “Active Perl”, download “ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi”
from the ActivePerl Web page (http://www.activestate.com) to your PC and execute it.
Regarding the details of Active Perl, please see the above Active Perl Web page.
ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi : Active Perl installer.
See 11.1. The Setting Method of JIG (Base Unit).
Or see 11.4. The Setting Method of JIG (Handset).
on DOS Window.
For RU,UA, CA, LA, LB, LC, LF, AG, ME, TW models, use "UserDef3.bat".
<Base unit>
Usage:”UserDef.bat –FP"
Usage:”UserDef3.bat –FP xx” xx=LA/ LB/LC/LF/AG/ME/TW
<Handset>
Usage:”UserDef.bat –PP"
Usage:”UserDef3.bat –PP xx” xx=LA/ LB/LC/LF/AG/ME/TW
reset