Read Sharp MX-LC13 (serv.man15) Technical Bulletin online
MX-M1204 MX-LC13 (LARGE CAPACITY TRAYS) 8 – 12
4) Remove the screw, and remove the paper guide cover in the
right side of the first-series MX-LC13.
5) Turn the paper guide cover over and fix it with screws again.
6) Attach the connection plate (Upper) to the first-series MX-
LC13 with the screws (No. 11 Hex washer S-tight M4 x 18).
7) Remove the connector cover of the first-series MX-LC13.
8)
Fit the connection plates (F/R) attached to the first-series MX-
LC13 with the LCT connection plates (F/R) attached to the
second-series MX-LC13.
LC13 with the LCT connection plates (F/R) attached to the
second-series MX-LC13.
9)
Attach the harness of the second-series MX-LC13 to the first-
series MX-LC13, and tighten the screw of the harness to fix.
series MX-LC13, and tighten the screw of the harness to fix.
NOTE: Use an L-shape screwdriver.
10) Adjust the clearance of the exterior cabinet evenly.
See drawing below.
Front side
Front side
TopPage
4
: ‘14/Jan
4
Click on the first or last page to see other MX-LC13 (serv.man15) service manuals if exist.