Read Sharp MX-FXX2 (serv.man2) Service Manual online
MX-FXX2 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 6
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of the values>
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
46-44
Purpose
Adjustment
Function (Purpose) Used to execute the FAX exposure adjust-
ment (Ultra Fine).
Section
MFP/FAX
Item
Image quality
Operation/Procedure
1)
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
played in the setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
3)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑], [↓], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of values>
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to L, the data are saved to EEPROM
and RAM and set to item M at the same time.
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to L, the data are saved to EEPROM
and RAM and set to item M at the same time.
46-45
Purpose
Adjustment
Function (Purpose) Used to execute the FAX exposure level
adjustment and the individual setting
(600DPI).
(600DPI).
Section
FAX
Item
Image quality
Operation/Procedure
1)
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
played in the setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
0
A:
A : 50
; AUTO
B : 50
; EXPOSURE1
SIMULATION NO.46-43
EXPOSURE ADJUSTMENT(FAX : SUPER FINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50
; EXPOSURE2
D : 50
; EXPOSURE3
Item
Display item & Detail of display
Content
Default value
Default value
Writing
A
AUTO
Ultra Fine/Auto
1 to 99
50
YES
B
EXPOSURE1
Ultra Fine/Exposure 1
1 to 99
50
YES
C
EXPOSURE2
Ultra Fine/Exposure 2
1 to 99
50
YES
D
EXPOSURE3
Ultra Fine/Exposure 3
1 to 99
50
YES
E
EXPOSURE4
Ultra Fine/Exposure 4
1 to 99
50
YES
F
EXPOSURE5
Ultra Fine/Exposure 5
1 to 99
50
YES
G
AUTO H_TONE
Ultra Fine/Auto/Half tone
1 to 99
50
YES
H
EXPOSURE1 H_TONE
Ultra Fine/Exposure 1/Half tone
1 to 99
50
YES
I
EXPOSURE2 H_TONE
Ultra Fine/Exposure 2/Half tone
1 to 99
50
YES
J
EXPOSURE3 H_TONE
Ultra Fine/Exposure 3/Half tone
1 to 99
50
YES
K
EXPOSURE4 H_TONE
Ultra Fine/Exposure 4/Half tone
1 to 99
50
YES
L
EXPOSURE5 H_TONE
Ultra Fine/Exposure 5/Half tone
1 to 99
50
YES
M
EXECUTE MODE
AUTO
Print mode
Ultra Fine/Auto
1 to 12
1
1 (AUTO)
NO
EXP1
Ultra Fine/Exposure 1
2
EXP2
Ultra Fine/Exposure 2
3
EXP3
Ultra Fine/Exposure 3
4
EXP4
Ultra Fine/Exposure 4
5
EXP5
Ultra Fine/Exposure 5
6
AUTO H_TONE
Ultra Fine/Auto/Half tone
7
EXP1 H_TONE
Ultra Fine/Exposure 1/Half tone
8
EXP2 H_TONE
Ultra Fine/Exposure 2/Half tone
9
EXP3 H_TONE
Ultra Fine/Exposure 3/Half tone
10
EXP4 H_TONE
Ultra Fine/Exposure 4/Half tone
11
EXP5 H_TONE
Ultra Fine/Exposure 5/Half tone
12
0
A:
A : 50
; AUTO
B : 50
; EXPOSURE1
SIMULATION NO.46-44
EXPOSURE ADJUSTMENT(FAX : ULTRA FINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50
; EXPOSURE2
D : 50
; EXPOSURE3
Click on the first or last page to see other MX-FXX2 (serv.man2) service manuals if exist.