Read Sharp MX-FXX2 (serv.man2) Service Manual online
MX-FXX2 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 8
<Set range and default value of each setup>
* A to I: The greater the adjustment value is, the greater the image
loss is. 1step=0.1mm
66
66-1
Purpose
Setting
Function (Purpose) Used to display the FAX-related soft SW (2
- 99) on the LCD to allow changing the soft
SW while checking with the LCD.
SW while checking with the LCD.
Section
FAX
Item
Setting
Operation/Procedure
1)
1)
Enter the [SW NO] with 10-key.
* When [C] key is pressed, the entered value of [SW NO] is
* When [C] key is pressed, the entered value of [SW NO] is
cleared.
2)
Press [DATA] button.
The soft SW data entered in procedure 1) is displayed.
* When [SW NO] button is pressed, the display returns to the
The soft SW data entered in procedure 1) is displayed.
* When [SW NO] button is pressed, the display returns to the
initial screen.
3)
Enter the number corresponding to the bit to be changed with
10-key.
[1]
10-key.
[1]
→ [0]
[0]
→ [1]
* When [SW NO] button is pressed, the display returns to the
initial screen.
4)
When [EXECUTE] button is pressed, it is highlighted and the
setting is saved.
After saving the setting, [EXECUTE] button returns to the nor-
mal display.
setting is saved.
After saving the setting, [EXECUTE] button returns to the nor-
mal display.
* When [CA] key is pressed, the simulation is terminated.
* When [SYSTEM SETTINGS] key is pressed, the display returns
* When [SYSTEM SETTINGS] key is pressed, the display returns
to the sub number entry screen.
66-2
Purpose
Setting
Function (Purpose) Used to enter a country code and set the
default value for the country code.
Section
FAX
Item
Setting
Operation/Procedure
1)
1)
When the machine enters Simulation 66-02, the following
screen is displayed.
* When [DEST CODE] button is pressed, the display is shifted
screen is displayed.
* When [DEST CODE] button is pressed, the display is shifted
to the country code list screen.
* The country code shift screen is shown on the next page.
* The currently set country code is displayed in the column of
* The currently set country code is displayed in the column of
"PRESENT:".
2)
Enter the country code (8 digits) with 10-key([0]/[1]). The
entered country code is displayed in the column of "NEW:" and
[SET] key becomes active.
* When [C] key is pressed, the column of “NEW:” is cleared.
entered country code is displayed in the column of "NEW:" and
[SET] key becomes active.
* When [C] key is pressed, the column of “NEW:” is cleared.
3)
When [SET] button is pressed after entering the country code,
[EXECUTE] button becomes active. The country code is dis-
played in the column of "PRESENT:", and the column of
"NEW:" is cleared.
* When [C] key is pressed, the display returns to the initial set-
[EXECUTE] button becomes active. The country code is dis-
played in the column of "PRESENT:", and the column of
"NEW:" is cleared.
* When [C] key is pressed, the display returns to the initial set-
ting screen.
4)
When [EXECUTE] button is pressed, it is highlighted and
[YES] and [NO] buttons become active. The country name is
displayed on the tile line.
* When [NO] button is pressed, [EXECUTE] button returns to
[YES] and [NO] buttons become active. The country name is
displayed on the tile line.
* When [NO] button is pressed, [EXECUTE] button returns to
the normal display and [YES] and [NO] buttons become
inactive.
inactive.
5)
When [YES] button is pressed, it is highlighted and the soft SW
corresponding to the country code is initialized.
* During clearing the FAX-related soft SW, [EXECUTE] and
corresponding to the country code is initialized.
* During clearing the FAX-related soft SW, [EXECUTE] and
[YES] buttons are highlighted.
Item
Display item
Description
Set range
Default value
FAX send
A
Image loss
setting OC
setting OC
LEAD_EDGE (OC)
OC lead edge image loss setting
0 to 100
30 (3mm)
B
FRONT_REAR (OC)
OC side image loss setting
0 to 100
20 (2mm)
C
TRAIL_EDGE (OC)
OC rear edge image loss setting
0 to 100
20 (2mm)
D
Image loss
setting SPF
SIDE1
setting SPF
SIDE1
LEAD_EDGE (SPF_SIDE1)
Front surface lead edge image loss setting
0 to 100
20 (2mm)
E
FRONT_REAR (SPF_SIDE1)
Front surface side image loss setting
0 to 100
20 (2mm)
F
TRAIL_EDGE (SPF_SIDE1)
Front surface rear edge image loss setting
0 to 100
30 (3mm)
G
Image loss
setting SPF
SIDE2
setting SPF
SIDE2
LEAD_EDGE (SPF_SIDE2)
Back surface lead edge image loss setting
0 to 100
20 (2mm)
H
FRONT_REAR (SPF_SIDE2)
Back surface side image loss setting
0 to 100
20 (2mm)
I
TRAIL_EDGE (SPF_SIDE2)
Back surface rear edge image loss setting
0 to 100
30 (3mm)
SCANNER
mode (FAX,
other than
COPY)
mode (FAX,
other than
COPY)
A
Image loss
setting OC
setting OC
LEAD_EDGE(OC)
OC lead edge image loss setting
0 to 100
0 (0mm)
B
FRONT_REAR(OC)
OC side image loss setting
0 to 100
0 (0mm)
C
TRAIL_EDGE(OC)
OC rear edge image loss setting
0 to 100
0 (0mm)
D
Image loss
setting SPF
SIDE1
setting SPF
SIDE1
LEAD_EDGE(SPF_SIDE1)
Front surface lead edge image loss setting
0 to 100
0 (0mm)
E
FRONT_REAR(SPF_SIDE1)
Front surface side image loss setting
0 to 100
0 (0mm)
F
TRAIL_EDGE(SPF_SIDE1)
Front surface rear edge image loss setting
0 to 100
0 (0mm)
G
Image loss
setting
SPFSIDE2
setting
SPFSIDE2
LEAD_EDGE(SPF_SIDE2)
Back surface lead edge image loss setting
0 to 100
0 (0mm)
H
FRONT_REAR(SPF_SIDE2)
Back surface side image loss setting
0 to 100
0 (0mm)
I
TRAIL_EDGE(SPF_SIDE2)
Back surface rear edge image loss setting
0 to 100
0 (0mm)
CLOSE
0
A:
SIMULATION NO.50㧙27
SCANNER/FAX-SEND ALL EDGE ADJUSTMENT VALUE
30
㨇
0㨪 100 㨉
OK
TEST
FAX
SCANNER
A㧦 30
㧧
LEAD_EDGE(OC)
B㧦 20
㧧
FRONT_REAR(OC)
C㧦 20
㧧
TRAIL_EDGE(OC)
D㧦 30
㧧
LEAD_EDGE(SPF_SIDE1)
SIMULATION NO.66-01
CLOSE
TEST
FAX SOFT SW.SETTING
0
EXECUTE
SW No.
DATA
:
:
(SW No.2-99)
1 2 3 4 5 6 7 8
Click on the first or last page to see other MX-FXX2 (serv.man2) service manuals if exist.