MX-FXX2 (serv.man2). MX-FXX2 Service Manual (Complete) - Sharp Copying Equipment Service Manual (repair manual). Page 13

MX-FXX2  SIMULATIONS, FAX SOFTWARE SWITCH  5 – 2

 

 

13--

Clear/cancel (Trouble etc.)

Function (Purpose) Used to cancel the self-diag "U1" trouble.
Section

FAX

Trouble

Operation/Procedure
1)

Press [EXECUTE] button.

2)

Press [YES] button to execute cancellation of the trouble. 

 

 

22-11

Adjustment/Setup/Operation data check

Function (Purpose) Used to check the use frequency (send/

receive) of FAX.

FAX

Counter

Operation/Procedure
The values of the FAX send counter and the FAX receive counter
are displayed.
Press [COLOR] or [BLACK] button to print. 

66

11

Used to send the selected signal at 300bps to the line and the speaker. (Send level: 
Max.)

FAX

Operation test/Check

12

Used to send the selected signal at 300bps to the line and the speaker. (Send level: 
Soft SW setting)
* For the kings of send signals at 300bps, refer to SIM66-11, 300bps send signal table.

FAX

Operation test/Check

13

Used to register dial numbers for SIM66-14/15/16, Dial test. (Up to 20 digits can be 
registered.)

FAX

Setting

14

Used to execute the dial pulse (10PPS) send test and to adjust the make time.

FAX

Adjustment

15

Used to execute the dial pulse (20PPS) send test and to adjust the make time.

FAX

Adjustment

16

Used to execute the DTFM signal send test and to adjust the send level.

FAX

Adjustment

17

Used to send the DTMF signal to the line and the speaker. (Send level: Max.)

FAX

Operation test/Check

18

Used to send the DTMF signal to the line and the speaker. (Send level: Soft SW 
setting)

FAX

Operation test/Check

21

Used to print the selected items (various registration information, communication 
management information, file management information, system error, protocol 
monitor).

FAX

Check

22

Used to set the handset sound volume. (This simulation can be executed even though 
the handset setting is set to NO. When, however, the handset is not installed, the 
sound volume cannot be checked.) (Japan model only)

FAX

Setting

24

Used to clear the FAST save data.

FAX

Data clear

25

Used to register the FAX number for MODEM dial-in.

FAX

Setting

26

Used to register external telephone numbers for MODEM dial-in.

FAX

Setting

29

Used to initialize the telephone book data (the one-touch registration table, the FTP/
Desktop expansion table, the group expansion table, the program registration table, 
the interface memory box table, the meta data, InboundRouting, and the 
DocumentAdmin table).

FAX

Clear

30

Used to display the TEL/LIU status change, The display is highlighted by status 
change.

FAX

Operation test/Check

31

Used to set ON/OFF the port for output to TEL/LIU.

FAX

Setting

32

Used to check the fixed data received from the line and to display the result.

FAX

Operation test/Check

33

Used to execute detection of various signals with the line connected and to display the 
detection result. When a signal is detected, the display is highlighted.

FAX

Operation test/Check

34

Used to execute the send test and display the time required for sending image data in 
the test. Used to execute send test and display. (Unit: ms)

FAX

Operation test/Check

36

Used to check send and receive data from the MODEM controller to the MFP controller 
or the data line or the command line individually.

FAX

Operation test/Check

39

Used to check and change the destination setting saved in EEPROM of the FAX BOX.

FAX

Setting

42

Used to rewrite the program to power control installed in the FAX BOX.

–

Setting

43

Used to write the adjustment value into the power control installed in the FAX BOX.

FAX

Setting

60

Used to provide the user the auto select function of a low-cost line by dialing with 
addition of the prefix to the dial number when calling

FAX

Setting

61

Used to display the FAX-related soft SW (100 - 170) on the LCD to allow changing the 
soft SW while checking with the LCD.

FAX

Setting

0

SIMULATION NO.13

TEST

U1 TROUBLE CANCELLATION

CLOSE

EXECUTE

ARE YOU SURE?

YES

NO

FAX OUTPUT

FAX print quantity counter (for line 1)

FAX OUTPUT_L2

FAX print quantity counter (for line 2)

FAX SEND

FAX send counter

FAX RECEIVED

FAX receive counter

SEND IMAGES

FAX send quantity counter (for line 1)

SEND IMAGES_L2

FAX send quantity counter (for line 2)

SEND TIME

FAX send time

RECEIVED TIME

FAX receive time

ACR SEND

Number of carrier prefix adding communications