Read Sharp MX-FNX6 Service Manual online
MX-FNX6 MECHANISM 3 – 8
4)
Transport of the first set is completed. At the same time, the
second set is transported to the staple section.
second set is transported to the staple section.
5)
The folding plate advances and the folding roller rotates to fold
the first set at the center. At the same time, transporting of the
second set to the center binding staple position is completed.
the first set at the center. At the same time, transporting of the
second set to the center binding staple position is completed.
6)
The first set folding is completed and discharged. At the same
time, the second set center binding stapling is completed.
time, the second set center binding stapling is completed.
9. Discharge mechanism
After completion of stapling, the discharge motor turns ON to drive the discharge belt, discharging copy paper from the staple tray with the dis-
charge fence attached to the belt.
At that time, the paper exit guide plate remains in the open state until the paper bundle lifted by the discharge pawl moves by a certain distance
from the paper exit roller.
Then, the paper exit guide closes and the paper bundle is discharged to the shift tray by the paper exit roller.
The paper exit guide plate is opened or closed by rotation of the cam caused by the rotation of the paper exit guide plate open/close motor to
move the link up and down.
When discharging paper to the shift tray, the discharge motor is stopped for 300ms to prevent excessive pushing up.
After temporary stopping, the discharge motor is driven again and stops under the state where the discharge fence turns on the home position
sensor filler.
There are two discharge fences to improve productivity of small-lot binding.
charge fence attached to the belt.
At that time, the paper exit guide plate remains in the open state until the paper bundle lifted by the discharge pawl moves by a certain distance
from the paper exit roller.
Then, the paper exit guide closes and the paper bundle is discharged to the shift tray by the paper exit roller.
The paper exit guide plate is opened or closed by rotation of the cam caused by the rotation of the paper exit guide plate open/close motor to
move the link up and down.
When discharging paper to the shift tray, the discharge motor is stopped for 300ms to prevent excessive pushing up.
After temporary stopping, the discharge motor is driven again and stops under the state where the discharge fence turns on the home position
sensor filler.
There are two discharge fences to improve productivity of small-lot binding.
Second set
paper bundle
paper bundle
Folding roller
Folding plate
Click on the first or last page to see other MX-FNX6 service manuals if exist.