Read Sharp MX-FNX6 Service Manual online
MX-FNX6 MECHANISM 3 – 3
3. Drive layout
4. Branch mechanism
1)
Paper is branched to the three directions by the proof branch
pawl and the staple branch pawl.
pawl and the staple branch pawl.
2)
In the proof mode, when discharging to the proof tray, copy
paper is transported to the proof tray by the proof branch pawl.
paper is transported to the proof tray by the proof branch pawl.
3)
In the shift mode, the proof branch pawl and the staple branch
pawl do not operate, and copy paper is transported to the shift
tray.
pawl do not operate, and copy paper is transported to the shift
tray.
Signal name
Parts name
M8
DRRLVI_M
Drive roller oscillation motor (*)
M11
FLDPLT_M
Folding plate drive motor (*)
M12
FLDROL_M
Folding roller motor (*)
M16
TALFNC_M
Rear edge fence motor (*)
S25
CLPROLHP
Drive roller HP sensor (*)
S26
FLDUNENT
Reach sensor (*)
S28
FLDBTMHP
Rear edge fence HP sensor (*)
S29
FLDPLTHP
Folding plate HP sensor (*)
S30
FLDCMHP
Folding HP sensor (*)
S31
FLDUNEXT
Folding pass sensor (*)
Signal name
Parts name
M1
ENT_M
Inlet motor
M2
UPTRS_M
Upper transport motor
M3
LOTRS_M
Lower transport motor
M4
EXIT_M
Paper exit motor
M5
BLT_M
Discharge motor
M11
FLDPLT_M
Folding plate drive motor (*)
M12
FLDROL_M
Folding roller motor (*)
M14
POP_M
Beating roller drive motor
M21
TRYLFT_M
Tray up/down motor
* S25
* S31
* M8
* S26
* S28
* S30
* M16
* S29
* M11
* M12
* MX-FNX7 only
M2
M1
M3
M14
M4
M21
M5
* MX-FNX7 only
* M12
* M11
When in the proof mode:
Staple branch pawl
Proof branch pawl
In the shift mode:
Click on the first or last page to see other MX-FNX6 service manuals if exist.