MX-FNX2 (serv.man8). Section 6 - Disassembly and Assembly . - Sharp Copying Equipment Service Manual (repair manual). Page 16

Read Sharp MX-FNX2 (serv.man8) Service Manual online

MX-FNX2/AR-PN1/MX-RBX1  DISASSEMBLY AND ASSEMBLY  6 – 16
11) Remove the punch unit [18] from the punch horizontal registra-
tion motor assembly [17].
B. PCBs
(1) Punch Controller PCB
1)
Remove the two screws [1].
2)
Disconnect the five connectors [2] to remove the punch con-
troller PCB [3].
(2) Horizontal Registration Photosensor PCB
1)
Remove the punch motor.  (See A.(1).)
2)
Remove the screw [1].
3)
Remove the harness [3] from the harness guide [2] on the
PCB, then detach the PCB cover [4].
4)
Disconnect the connector [5] to remove the photosensor PCB
[6].
(3) Removing the LED PCB
1)
Remove the punch waste case.
2)
Disconnect connector [1].
3)
Remove the harness [3] from the harness guide [2].
4)
Remove the screw [4] and washer [5].
5)
Disconnect the connector [6].
6)
Remove the screw [7] to detach the base cover [8].
[17]
[18]
[2]
[3]
[2]
[2]
[1]
[4]
[1]
[2]
[3]
[6]
[5]
[1]
[3]
[2]
[8]
[4]
[5]
[7]
[6]
Page of 17
Display

Click on the first or last page to see other MX-FNX2 (serv.man8) service manuals if exist.