MX-FNX2 (serv.man8). Section 6 - Disassembly and Assembly . - Sharp Copying Equipment Service Manual (repair manual). Page 15

Read Sharp MX-FNX2 (serv.man8) Service Manual online

MX-FNX2/AR-PN1/MX-RBX1  DISASSEMBLY AND ASSEMBLY  6 – 15
(3) Removing the Punch Unit
1)
Remove the waste case.
2)
Remove the screw [1] to detach the jam processing cover [2].
3)
Disconnect the connector [3].
4)
Remove the harness [5] from the harness guide [4].
5)
Disconnect the connector [6].
6)
Remove the screw [7] and sensor support plate [8].
7)
Remove the screw [9] and washer [10].
8)
Disconnect the connector [11].
9)
Remove the two screws [12] to detach the base cover [13].
10) Remove the four screws [14] to remove the upper transmission
sensor unit [15] and lower transmission sensor [16]. 
[2]
[1]
[3]
[5]
[4]
[6]
[7]
[8]
[13]
[9]
[10]
[12]
[11]
[14]
[14]
[14]
[15]
[16]
Page of 17
Display

Click on the first or last page to see other MX-FNX2 (serv.man8) service manuals if exist.