Read Sharp MX-FNX2 (serv.man8) Service Manual online
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 11
7)
Disconnect the connector [8].
8)
Remove the flexible cable retainer [9].
9)
Free the lock [10] of the connector in the direction of the arrow;
then, detach the flexible cable [11], and then detach the side
home position PCB [12].
then, detach the flexible cable [11], and then detach the side
home position PCB [12].
2. Paper Transport Section (MX-RBX1)
A. Paper Pass Unit
1)
Pull out the paper pass unit, and remove the screw.
2)
Free the lock, to remove the paper pass unit.
(1) Paper transport unit entry sensor
1)
Remove the paper pass unit.
2)
Remove the paper transport unit entry sensor.
(2) Paper transport unit exit sensor
1)
Remove the paper pass unit.
2)
Remove the bracket, and remove the paper transport unit exit
sensor.
sensor.
(3) Upper Guide Flapper
1)
Remove the paper pass unit.
2)
Open the upper transport unit, remove each parts, and remove
the reverse gate.
the reverse gate.
(4) Interface Fan
1)
Remove the paper pass unit.
2)
Remove the bottom cover.
3)
Remove the clamps, and disconnect the connector then
remove the interface fan.
* Install the interface fan so as the side with the label (A)
remove the interface fan.
* Install the interface fan so as the side with the label (A)
comes to the direction illustrated.
[6]
[8]
[10]
[11]
[9]
1
2
3
1
2
2
3
Click on the first or last page to see other MX-FNX2 (serv.man8) service manuals if exist.