Read Sharp MX-FNX10 Service Manual online
MX-FN10 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 – 7
E. Interface transport section (MX-RBX3)
No.
Code
Signal
Name
Type
Function/Operation
Output
1
PNCH_MOT
FPM
Finisher Punch Motor
Drives the punch unit up and down.
2
SLDMOT
FPSM
Finisher Punch Shift Motor
Shifts the punch unit to the center of paper.
3
Punch Control PWB
Controls the punch.
4, 5
REGTIMS
FPTS
Finisher Punch Timing
Sensor
Sensor
Transmission
type photo
sensor
type photo
sensor
Detects the lead edge and the rear edge of
paper to be punched.
paper to be punched.
When there is paper, TP54 on
the control PWB of the finisher
becomes LOW level.
the control PWB of the finisher
becomes LOW level.
4, 5
SIZE_B5R
FPES1
Finisher Punch Paper
Edge Sensor 1
Edge Sensor 1
Transmission
type photo
sensor
type photo
sensor
Detects the paper edge on the rear of the
machine in the width direction of E5R and
EXE-R size.
machine in the width direction of E5R and
EXE-R size.
When there is paper, TP55 on
the control PWB of the finisher
becomes LOW level.
the control PWB of the finisher
becomes LOW level.
4, 5
SIZE_A4R
FPES2
Finisher Punch Paper
Edge Sensor 2
Edge Sensor 2
Transmission
type photo
sensor
type photo
sensor
Detects the paper edge on the rear side of
the machine in the width direction of LGL,
LTR-R, FS, and A4R size.
the machine in the width direction of LGL,
LTR-R, FS, and A4R size.
When there is paper, TP55 on
the control PWB of the finisher
becomes LOW level.
the control PWB of the finisher
becomes LOW level.
4, 5
SIZE_B4R
FPES3
Finisher Punch Paper
Edge Sensor 3
Edge Sensor 3
Transmission
type photo
sensor
type photo
sensor
Detects the paper edge on the rear side of
the machine in the width direction of EXE,
B4, and B5 size.
the machine in the width direction of EXE,
B4, and B5 size.
When there is paper, TP55 on
the control PWB of the finisher
becomes LOW level.
the control PWB of the finisher
becomes LOW level.
4, 5
SIZE_A3
FPES4
Finisher Punch Paper
Edge Sensor 4
Edge Sensor 4
Transmission
type photo
sensor
type photo
sensor
Detects the paper edge on the rear side of
the machine in the width direction of A3,
A3 wide, and A4 size.
the machine in the width direction of A3,
A3 wide, and A4 size.
When there is paper, TP55 on
the control PWB of the finisher
becomes LOW level.
the control PWB of the finisher
becomes LOW level.
6, 7
DUST
FPDFS
Finisher Punch Dust Full
Sensor
Sensor
Photointerrupter
Detects full of the punch dust box.
When full, TP2 on the punch
PWB remains HI level.
PWB remains HI level.
No.
Signal
Name
Type
Function/Operation
Output
1
PDPPD1
Interface transport unit inlet port
sensor
sensor
Photointerrupter
Interface inlet port paper detection
LO light is interrupted when paper is
provided.
provided.
2
PDPPD2
Interface transport unit outlet port
sensor
sensor
Photointerrupter
Interface outlet port paper detection
LO light is interrupted when paper is
provided.
provided.
3
PDCS
Interface transport unit cover sensor
Photointerrupter
Interface cover open detection
Light is interrupted when the cover is
open.
open.
4
PDPTM
Interface transport motor
Paper transport roller drive
5
PDPGS
Interface reverse path solenoid
Drive of the flapper which selects the
path in the finisher and the reverse path
path in the finisher and the reverse path
6
PDCF
Interface fan
Temperature rise protection fan in the
finisher inlet port section
finisher inlet port section
2
3
5
6
4
1
Click on the first or last page to see other MX-FNX10 service manuals if exist.