MX-FNX10. MX-FN10 Service Manual (Complete) - Sharp Copying Equipment Service Manual (repair manual). Page 10

Read Sharp MX-FNX10 Service Manual online

MX-FN10  EXTERNAL VIEWS AND INTERNAL STRUCTURES  4 – 4
Separate table
16
SFTCLKS
FTLMRS
Finisher Tray Lift Motor 
Rotation Sensor
Photointerrupter
Detection of abnormality such as 
the load tray motor lock.
The output is switched between 
HI and LO according to the shift 
speed of the load tray lifting and 
descending.
17
SFTUPLMT
FTULD
Finisher Tray Upper Limit 
Detector
Photointerrupter
Detection of the upper limit 
position of up/down shift area of 
the paper load tray
When at the upper limit position, 
TP1 becomes LO level.
18
SFTDNLMT
FTLLD
Finisher Tray Lower Limit 
Detector
Photointerrupter
Detection of the lower limit of up/
down shift area of the paper load 
tray
When at the lower limit position, 
TP3 becomes LO level.
19
SFTSDNLMT
FTPS
Finisher Tray Position 
Sensor
Photointerrupter
Detection of large size paper tray 
full
When at the intermediate 
position, TP2 becomes LO level.
20
BNDBRDHP
FSPHS
Finisher Saddle Plate 
Homeposition Sensor
Photointerrupter
Detection of the saddle pushing 
plate home position
When at home position, TP10 
becomes LO level.
21
BNDJOGHPS
FSAPHS
Finisher Saddle Alignment 
Plate Homeposition Sensor
Photointerrupter
Detection of the saddle alignment 
guide home position
When at home position, TP10 
becomes LO level.
22
RENDHPS
FSPGHS
Finisher Saddle Paper Guide 
Homeposition Sensor
Photointerrupter
Detection of the saddle movable 
pushing plate home position
When at home position, TP10 
becomes LO level.
23
BNDSLDHPS
FSSSHPS
Finisher Saddle Stapler Shift 
Home Position Sensor
Photointerrupter
Detection of the edge stapler unit 
home position in FR direction
When at home position, TP7 
becomes HI level.
24
BNDR3S
FSRHS
Finisher Saddle Roller 
Homeposition Sensor
Photointerrupter
Detection of the saddle process 
section transport roller (No. 3 
roller) home position
When at home position, TP7 
becomes HI level.
25
BNDBRDCLKS
FSMRS
Finisher Saddle Motor 
Rotation Sensor
Photointerrupter
Detection of abnormality of the 
saddle pushing plate shift speed 
control and the motor lock, etc.
The output is switched between 
HI and LO according to the speed 
of the pushing plate motor.
26
JOGPOSS
FSSSW2
Finisher Stapler Safety 
Switch 2
Photointerrupter
Detection of the edge stapler 
clinchable position
When at the clinchable position, 
TP7 becomes HI level.
27
GRPOUTS
FPDD
Finisher Paper Delivery 
Detector
Photointerrupter
Detection of the gripper arm exit 
complete position
When at the gripper exit complete 
position, TP7 becomes HI level.
28
FDOORS
FCD1
Finisher Cover Detector 1
Photointerrupter
Detection of the front door cover 
open/close
When the front cover is closed, 
TP15 becomes LO level.
29
JOINTS
FCD
Finisher Connection 
Detector
Photointerrupter
Detection of connection of the 
finisher with the main unit
When connected to the main unit, 
TP15 becomes LO level.
30
FDOORSW
FSSW1
Finisher Safety Switch 1
Micro switch
Detection of open/close of the 
jam release cover in the front 
section
When the cover is closed, TP15 
becomes LO level.
31
STPLSAFESW
FSSSW1
Finisher Staple Safty Switch 
1
Micro switch
Assuring the safety against 
insertion of a foreign material in 
the lift guide section
When the cover is closed, TP15 
becomes LO level.
32
BNDSTPRESW
FSSCS
Finisher Saddle Staple 
Cover Sensor
Micro switch
Detection of open/close of the 
saddle stapler staple replacement 
cover
When the cover is closed, TP15 
becomes LO level.
33
STPHPS
FSSHS
Finisher Saddle Staple 
Homeposition Sensor
-
Detection of the stapling 
mechanism home position 
(Sensor built in the stapler unit)
When at the home (standby) 
position, TP51 becomes HI level.
34
STPEMPS
FSSES
Finisher Saddle Staple 
Empty Sensor
-
Detection of staple empty (sensor 
built in the stapler unit)
When staple empty, TP53 
becomes LO level.
35
STPSLFPS
FSLS
Finisher Staple Lead Sensor
-
Detection of stapling enable state 
after completion of staple feed 
(sensor built in the stapler unit)
When in the READY state, TP52 
becomes HI level.
36
BNDSTPHP
FSHS
Finisher Staple 
Homeposition Sensor
-
Detection the stapling mechanism 
home position (sensor built in the 
stapler unit)
When at the home (standby) 
position, TP51 becomes HI level.
37
BNDSTPEMP
FSED
Finisher Staple Empty 
Detector
-
Detection of staple empty (sensor 
built in the stapler unit)
When staple empty, TP53 
becomes LO level.
LVLS
LVLHPS
Status
TP71
TP13
LO
LO
Detection of a low position of the paper surface on the load tray.
LO
HI
Detection of retraction of the paper surface lever.
HI
LO
Detection of the paper surface position on the load tray. 
HI
HI
Detection of a high position of the paper surface on the load tray.
No.
Code
Signal
Name
Type
Function/Operation
Output
Page of 56
Display

Click on the first or last page to see other MX-FNX10 service manuals if exist.