MX-FN28, MX-FN29 (serv.man8). CCE 1566 CHANGE IN SHAPE OF PLATE TRANSPORT MIDDLE - Sharp Copying Equipment Technical Bulletin (repair manual). Page 5

Read Sharp MX-FN28 / MX-FN29 (serv.man8) Technical Bulletin online

 
Sharp Electronics (UK) Ltd., Document Systems Support
 
[How to replace the part in the field] 
Please follow the steps below for part replacement. 
(Make sure to remove the part before pulling out the Saddle unit) 
 
Open Front Cabinet.   
く 
Remove this screw and replace the part. 
＜How to remove＞ 
 
② 
＜How to fix＞ 
Draw out the saddle unit   
The bottom section should be hooked. 
The part can be inserted by tilting.   
Fix screw   
① 
② 
① 
Remove this cardboard material.   
Remove the screw then the fixing plate

Display

Download Sharp MX-FN28 / MX-FN29 (serv.man8) Technical Bulletin

Found More:

MX-FN28 / MX-FN29 (serv.man8) Service Manuals

Download	Pages	Size
MX-FN28 MX-FN29 Service Manual (Revised April 2017). Service Manual	35	7.87 MB
MX-FN28 MX-FN29 (serv.man2) Parts Guide (Revised May 2017). Parts Guide	112	10.3 MB
MX-FN28 MX-FN29 (serv.man3) CCE 1813 DESIGN CHANGE OF BUSHING STAPLE TRANSPORT Technical Bulletin	2	207.84 KB
MX-FN28 MX-FN29 (serv.man4) CCE 1724 ADDITION OF GUIDE SHEET TO OPEN CLOSE PAPER GUIDE SECTION Technical Bulletin	6	527.63 KB
MX-FN28 MX-FN29 (serv.man5) CCE 1713 PARTS CHANGE FOR COMMON USE WITH OTHER MODELS Technical Bulletin	3	432.61 KB
MX-FN28 MX-FN29 (serv.man6) CCE 1638 CHANGE IN SHAPE OF PARTS FOR 1K FINISHER Technical Bulletin	2	216.85 KB
MX-FN28 MX-FN29 (serv.man7) CCE 1584 FINISHER UPGRADE ... (1) Technical Bulletin	2	59.16 KB
MX-FN28 MX-FN29 (serv.man9) Adjustment of saddle fold and staple position. Technical Bulletin	2	286.42 KB

Random: