Read Sharp MX-FN28 / MX-FN29 (serv.man6) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
Date:
15
th
Sept 2016
Model:
See below
Ref.:
CCE 1638
Colour:
White
Page:
1 of 2
TECHNICAL BULLETIN
CHANGE IN SHAPE OF PARTS FOR 1K
FINISHER
1. Model Name:
MX-FN28/FN29 (Option
for MX-3050N/3550N/4050N/5050N/6050N
MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N)
2. Description:
The parts for 1K Finisher have been modified as follows:
①
The shape of GUIDE PLATE:PROOF TRAY has been changed because
sometimes it interferes with PROOF TRAY, causing scratches.
②
The TORSION SPRING for grounding contacts with the ribs on GUIDE
PLATE:OPEN AND CLOSE:ASS'Y. This caused unstable contact with the
discharge brush so that electrostatic charges couldn’t be removed properly which
discharge brush so that electrostatic charges couldn’t be removed properly which
eventually caused poor paper alignment to occur. The ribs on the GUIDE
PLATE:OPEN AND CLOSE:ASS'Y have been removed as a countermeasure.
③
The REFLECTION PHOTO SENSOR:ORIGINAL TRAY responds and falsely
detects the frame as paper. Sometimes this causes papers to get stuck at paper
exit and results in a paper jam. The MAT: SENSOR has been attached to rear side
of the ARM:GATHERING ROLLER:ASS'Y as a countermeasure.
①GUIDE PLATE:PROOF TRAY
Before
After
This section has been chamfered.
Sharp Electronics (UK) Ltd., Document Systems Support
②GUIDE PLATE:OPEN AND CLOSE:ASS'Y
Before
After
③Location of MAT: SENSOR
3. Action:
From February 2016 production
4. Parts Action:
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty
Parts name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1
MX-FN28
MX-FN29
MX-FN29
ALL
7-75
37-75
37-75
0JED6862321F/
0JED6862321G/
AZ
1
GUIDE
PLATE:PROOF TRAY
PLATE:PROOF TRAY
2016/2
3
8-100
38-132
38-132
0JEC3202610//
0JEC3202610B/
AY
1
GUIDE PLATE:OPEN
AND CLOSE:ASS'Y
AND CLOSE:ASS'Y
1
-
-
0JEA4221063//
AP
1
MAT: SENSOR
-
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Two pcs of rib have
been removed.
been removed.
Size after attachment:
4.5mm - 6.5mm
4.5mm - 6.5mm
Display