Read Sharp MX-FN28 / MX-FN29 (serv.man9) Technical Bulletin online
MX-FN29 Saddle Stitch
And Fold Position Adjustment
In the case of the staple position or folding position being incorrect you can
adjust both by using the procedure listed on this page
adjust both by using the procedure listed on this page
.
To adjust the staple position, use the System settings, Common settings,
Device control Saddle Fold/Stitch Position Adjust.
Device control Saddle Fold/Stitch Position Adjust.
Once you have the staple position central (Ignoring the fold position at this
stage) Exit from system settings. Now using the dip switches on the finisher
control pwb, make adjustment to the fold position using the table below.
stage) Exit from system settings. Now using the dip switches on the finisher
control pwb, make adjustment to the fold position using the table below.
Sharp Electronics (UK) Ltd., Document Systems Support
Date:
26
th
Feb 2016
Model:
See below
Ref.:
CCE 0000
Colour:
White
Page:
1 of 2
TECHNICAL BULLETIN
Once the fold position is correct you can adjust any skew by turning the
knurled screw on the bottom of the saddle unit.
Sharp Electronics (UK) Ltd., Document Systems Support
Display
