Read Sharp MX-FN28 / MX-FN29 (serv.man4) Technical Bulletin online
Technical Report
DIGITAL FULL COLOR COPIER (OPTION): MX-FN28/FN29
No. : CCE-1724
Date: May 9, 2017
この資料に掲載されている表示価格は消税抜きです。
SHARP CORPORATION
Office Solutions Business Unit
C
ADDITION OF GUIDE SHEET TO
OPEN/CLOSE PAPER GUIDE SECTION
1. Model Name:
MX-FN28/FN29 (Option for MX-3050N/3550N/4050N/5050N/6050N/3060N
3560N/4060N/3070N/3570N/4070N/5070N/6070N)
2. Description:
Guide sheet has been added to the open/close paper guide section to improve the
delivery performance of the paper curled upward.
*For attaching procedure, please see the separate sheet.
Location where to add Guide sheet (Excerpt from Parts Guide 7 Transport Section 4)
Reference for attaching
Open/close paper guide
Reference of hole
Reference
of end face
of end face
Reference of end face
Reference of hole
3. Action:
From February 2017 production
4. Parts Action:
Ref.
No.
Model
name
Destination P/G No.
Current parts
New parts
Price
rank
Q'ty
Parts name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1
MX-FN29
ALL
7-
-
0JEC3202312//
AK
2
GUIDE: PROOF TRAY:
OPEN AND CLOSE
2017/2
-
MX-FN28
37-
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Procedure to attach the guide sheet
1. Detach Rear guide cover.
2. Open Front cover, and remove the knob.
3. Detach Inner cover.
Be careful not to drop
the parallel pin.
Unscrew the screws.
MX-FN28
MX-FN29
MX-FN28
MX-FN29
Unhook the pawl of
the knob, and pull out
the knob.
Unhook the pawl of
the knob, and pull out
the knob.
Unscrew the screw.
MX-FN28
MX-FN29
Unfix the connector.
Pull out Saddle UN.
4. Open Upper cover, and remove the resin E-rings (x2).
5. Detach Upper cover.
6. Unhook the harness of the rear frame side from the clamp, and remove the connector.
7. Run the harness through a hole of the rear frame inside.
Pull out the harness from
the frame hole.
Remove the fulcrum boss,
and detach the cover.
