Read Sharp MX-FN19 / MX-FN20 / MX-PN12 Specification online
MX-FN19 MAINTENANCE 4 – 6
d. Removal of saddle inlet front inside cover (FN20)
1) Remove the three screws [1], and remove the saddle inlet front
1) Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
e. Removal of front inside upper cover
1) Remove the four screws [1], and remove the front inside upper
1) Remove the four screws [1], and remove the front inside upper
cover [2].
f. Removal of left upper cover
1) Remove the two screws [1].
2) With the upper door [2] open, tilt the left upper cover [3], and
1) Remove the two screws [1].
2) With the upper door [2] open, tilt the left upper cover [3], and
remove it.
CAUTION: When installing, be sure to engage the two pawls [4] of
the left upper cover with the metal plates.
g. Removal of grate-shaped upper guide
1)
1)
Move the tray [1] lower than the grate-shaped upper guide [2].
(For moving of the tray, refer to "Removal of No. 1 tray")
(For moving of the tray, refer to "Removal of No. 1 tray")
2)
Remove the five screws [3], and remove the grate-shaped
upper guide [2].
upper guide [2].
(6) Grate-shaped lower guide
a. Removal of front cover
1)
1)
Open the front cover [1], and remove the clip [2].
2)
Lift the front cover [1], and remove it.
[1]
[2]
[1]
[1]
[2]
[1]
FN19
FN20
[3]
[2]
[1]
[4]
[3]
[2]
[1]
FN19
[1]
[2]
FN20
Click on the first or last page to see other MX-FN19 / MX-FN20 / MX-PN12 service manuals if exist.