MX-FN19, MX-FN20, MX-PN12. All Sections - Sharp Copying Equipment Specification (repair manual). Page 20

Read Sharp MX-FN19 / MX-FN20 / MX-PN12 Specification online

MX-FN19  MAINTENANCE  4 – 3
2) Remove the three screws [3], and shift the front inside lower
cover [4] to the left side, and remove it.
d. Removal of saddle inlet front inside cover (FN20)
1) Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
e. Removal of front inside upper cover
1) Remove the four screws [1], and remove the front inside upper
cover [2].
f. Removal of left upper cover
1)
Remove the two screws [1].
2)
With the upper door [2] open, tilt the left upper cover [3] to the
right, and remove it. 
CAUTION: When installing, be sure to engage the two pawls [4] of
the left upper cover with the metal plates. 
(4) Upper door
a. Removal of front cover
1)
Open the front cover [1], and remove the clip [2].
2)
Lift the front cover [1], and remove it.
[1]
[2]
[1]
[1]
[2]
[1]
FN19
FN20
[3]
[2]
[1]
[4]
FN19
[1]
[2]
FN20
Page of 127
Display

Click on the first or last page to see other MX-FN19 / MX-FN20 / MX-PN12 service manuals if exist.