Read Sharp MX-FD10 (serv.man3) Service Manual online
MX-7040N MX-FD10 (FOLDING UNIT) 19 – 3
B. Paper folding unit connection
1)
Connect the unit to the decurler unit.
Insert the pin in the decurler unit side into the hole in the unit.
Insert the pin in the decurler unit side into the hole in the unit.
2)
Open the front upper cover, remove the screw and put down
the lock lever. Tighten the removed screw to fix the lock lever.
the lock lever. Tighten the removed screw to fix the lock lever.
C. Height adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
height is decreased. When turned clockwise, the height is
increased.
MEMO: The specification of the height adjustment is as follows.
Height: The difference of level between top surface of the adjacent
device is within
device is within
2mm.
1)
Open the front upper cover, pull out the folder section, and
remove the wrench from the front cover of the folder section.
remove the wrench from the front cover of the folder section.
2)
Turn the adjuster bolt of the caster (connection unit side) on
the front side to adjust the height.
the front side to adjust the height.
3)
Turn the adjuster bolt of the caster (connection unit side) on
the rear side to adjust the height.
the rear side to adjust the height.
[1]
[2]
[1]
[2]
Click on the first or last page to see other MX-FD10 (serv.man3) service manuals if exist.