MX-FD10 (serv.man3). MX-FD10 Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 2

MX-7040N  MX-FD10 (FOLDING UNIT)  19 – 2

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1)

Fix the connection plates F/R (Packed items No.5) and the
connection pin (Packed items No.6) to the decurler unit with
the screws (Packed items No.4).

2)

Fix the paper guide B (bundled with the decurler unit No.12)
and the protection Mylar (bundled with the decurler unit No.14)
together to the decurler unit with the screws (bundled with the
decurler unit No.1). 

MEMO: Temporarily attach the protection sheet to the decurler
unit with the duplex tape (back of the protection sheet), then fix
it with the screw.

1)

Fix the connection plates F/R (bundled with the inserter No.4,
5) and the connection pin (Packed items No.6) to the inserter
with the screws (Packed items No.4).

Cushion attachment
position

Reference of cushion on.
(Rear screw hole tiered edge)

Reference of cushion on.
(Upper cabinet lower edge)