Read Sharp MX-C301 / MX-C301W (serv.man5) Service Manual online
MX-C301 SIMULATION 6 – 8
3. Details of simulation Gemini
1
1-1
Purpose
Operation test/check
Function (Purpose)
Used to check the operation of the scanner
(reading) unit and the control circuit.
(reading) unit and the control circuit.
Section
Scanner (reading)
Operation/Procedure
1)
Select the operation speed with the touch panel key.
2)
Press [EXECUTE] key.
Scanning is once performed at the speed corresponding to the
scan resolution (operation speed).
scan resolution (operation speed).
1-2
Purpose
Operation test/check
Function (Purpose)
Used to check the sensors in the scanner
(reading) section and the related circuits.
(reading) section and the related circuits.
Section
Scanner (reading)
Operation/Procedure
The operating status of the sensor is displayed.
When "MHPS" is highlighted, the scanner unit is in the home posi-
tion.
tion.
1-5
Purpose
Operation test/check
Function (Purpose)
Used to check the operation of the scanner
(reading) unit and the control circuit.
(reading) unit and the control circuit.
Section
Scanner (reading)
Operation/Procedure
1)
Select the operation speed with the touch panel key.
2)
Press [EXECUTE] key.
Scanning is repeated at the speed corresponding to the scan
resolution (operation speed).
resolution (operation speed).
When [EXECUTE] key is pressed, the operation is terminated.
2
2-1
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the auto-
matic document feeder and the control cir-
cuit.
matic document feeder and the control cir-
cuit.
Section
RSPF
Operation/Procedure
1)
Select the operation mode and the speed with the touch panel
key.
key.
2)
Press [EXECUTE] key.
The RSPF repeats paper feed, transport, and paper exit oper-
ations at the speed corresponding to the scan resolution (oper-
ation speed).
ations at the speed corresponding to the scan resolution (oper-
ation speed).
When [EXECUTE] key is pressed, the operation is terminated.
2-2
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the sen-
sors and the detectors in the automatic
document feeder section and the control
circuits.
sors and the detectors in the automatic
document feeder section and the control
circuits.
Section
RSPF
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
played.
The code names of the sensors and the detectors which are active
are highlighted.
are highlighted.
2-3
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the loads
in the automatic document feeder and the
control circuit.
in the automatic document feeder and the
control circuit.
Section
RSPF
Operation/Procedure
1)
Select a target item of the operation check with the touch panel
key.
key.
2)
Press [EXECUTE] key.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
Item
Display
Operation mode
Default value
OC
SCAN
SCAN
300DPI
300DPI (220.0 mm/s)
300DPI
(220.0 mm/s)
(220.0 mm/s)
400DPI
400DPI (165.0 mm/s)
600DPI
600DPI (110.0 mm/s)
Item
Display
Operation mode
Default value
OC SCAN
300DPI
300DPI (220.0 mm/s)
300DPI
(220.0 mm/s)
(220.0 mm/s)
400DPI
400DPI (165.0 mm/s)
600DPI
600DPI (110.0 mm/s)
Item/Display
Operation mode
Default value
(SINGLE)
300DPI
300DPI (259.5mm/s)
300DPI
(259.5mm/s)
(259.5mm/s)
400DPI
400DPI (259.5mm/s)
600DPI
600DPI (173.0 mm/s)
(DOUBLE)
300DPI
300DPI (259.5mm/s)
300DPI
(259.5mm/s)
(259.5mm/s)
400DPI
400DPI (259.5mm/s)
600DPI
600DPI (173.0 mm/s)
Display
Content
SSET
SPF installation detection
SCOV
RSPF cover open/close detector
SPED
Document sensor
SPPD1
Document transport sensor 1
SPPD2
Document transport sensor 2
Display
Content
SPFM_F
RSPF transport motor (normal rotation)
SPFM_R
RSPF transport motor (reverse rotation)
SPUS
Paper feed roller pressure control solenoid (RSPF)
SRVC
Registration roller clutch (RSPF)
Click on the first or last page to see other MX-C301 / MX-C301W (serv.man5) service manuals if exist.