MX-B382 (serv.man7). INSTALLATION MANUAL - Sharp Copying Equipment Service Manual (repair manual). Page 11

MX-B382/B402  MX-B382/B402 (MAIN UNIT)  1 – 7

2)

Face the cleaner downward, and slowly insert the LSU clean-
ing rod into the LSU cleaning hole.
* The LSU cleaning hole is indicated with a label.

3)

After inserting the LSU cleaning rod with the cleaning side face
down, pull it out until the lead edge of the cleaning unit is sepa-
rated from the LSU clearing surface. Repeat 2 - 3 times for
cleaning.

4)

Return the LSU cleaning rod to the front cover.

5)

Install the waste toner box, and turn the lock lever to the left
until it stops to lock the waste toner box.

6)

Close the front cover.

1)

Install the Operation Manual pocket (included in package)
cover to the left side of the machine.
a)

First, insert the pawl on the lower side of the Operation
Manual pocket.

b)

Then, lift the pawl on the upper side and insert it, and slide
down to install.

1)

Gently pull out the tray until it stops. If paper remains in the
tray, remove it.

2)

Adjust the guide plates A and B to the vertical size and the hor-
izontal size of paper. 
The guide plates A and B are movable. Hold the fixing knob to
slide the guide plates A and B to match the paper size.

Cleaning
side