Read Sharp MX-B382 (serv.man7) Service Manual online
MX-B382/B402 MX-B382/B402 (MAIN UNIT) 1 – 3
4)
Remove the carton.
5)
Remove the parts included in the package.
6)
Remove the main unit from the bottom padding, and remove
the polyethylene bag.
the polyethylene bag.
B. Removal of the fixing tape and protection
material
C. Check the packed items
1)
Check that all the parts are in the package.
4. Installation
After completion of installation, check to confirm that the ROM ver-
sion is the latest one. If not, upgrade the firmware to the latest ver-
sion.
sion is the latest one. If not, upgrade the firmware to the latest ver-
sion.
A. Fusing heat roller pressing (F/R)
1)
Open the right door.
2)
Lower the pressure release levers to apply more pressure.
NOTE:
For North America, the power
cable is attached vertically to
the machine.
For North America, the power
cable is attached vertically to
the machine.
No.
Packed part names
Quantity
1
Developer
Other than North America: 1 piece
2
Waste toner box
1
3
AC cord
1
4
Operation Manual
1 set
5
Operation Manual pocket
Yes
6
Toner cartridge
Other than North America: 1 piece
1
2
4
5
6
3
NOTE:
If the machine is left unused for one month or more, the heat
roller rubber may be deformed. If knowing the machine will
be left idle for an extended time period, release the pressure
on the heat rollers by pushing up on the levers.
If the machine is left unused for one month or more, the heat
roller rubber may be deformed. If knowing the machine will
be left idle for an extended time period, release the pressure
on the heat rollers by pushing up on the levers.
Click on the first or last page to see other MX-B382 (serv.man7) service manuals if exist.