Read Sharp MX-B382 (serv.man7) Service Manual online
MX-B382/B402 MX-B382/B402 (MAIN UNIT) 1 – 10
K. Functional operation check
Check to confirm that the following operations are normal.
L. USB PORT selection
There are two USB ports, one on the rear frame side and the other
on the front frame side. A dip switch on the MFP PWB determines
which port is used.
When shipping, the port on the front frame side is valid and the port
on the rear frame side is invalid.
The valid port can be switched by changing the setting of the MFP
PWB DIP SW.
Select the valid USB port according to the user's request.
on the front frame side. A dip switch on the MFP PWB determines
which port is used.
When shipping, the port on the front frame side is valid and the port
on the rear frame side is invalid.
The valid port can be switched by changing the setting of the MFP
PWB DIP SW.
Select the valid USB port according to the user's request.
M. Storing setting and adjustment data
Use SIM22-6 to print and store the settings and adjustments data
(list).
• When a memory trouble occurs, if the above information is not
(list).
• When a memory trouble occurs, if the above information is not
available, all the adjustments must be performed from the begin-
ning.
ning.
• If the above information is available, the setting and adjustment
values can be directly entered, shortening the servicing time.
N. Procedures required for transit of the machine
1)
If the following option is installed, remove it from the machine.
• Finisher
• Finisher
2)
Remove the following consumable parts from the machine.
• Paper
• Toner cartridge
• Developer cartridge
• Paper
• Toner cartridge
• Developer cartridge
NOTE: When moving take extreme care to prevent shock or vibra-
tion to the machine as there is a hard drive built into this
product.
product.
Check item
Equipment
Key input operation (Operation panel)
Display (Operation panel)
Paper feed
operation
Display (Operation panel)
Paper feed
operation
Manual paper feed
Main unit paper feed
tray
Option paper feed unit
Main unit paper feed
tray
Option paper feed unit
With the option paper feed
unit installed
unit installed
Paper size
detection operation
detection operation
Manual paper feed tray
RSPF operation /
Duplex copy
operation
Duplex copy
operation
S-S mode
D-S mode
S-D mode
D-D mode
D-S mode
S-D mode
D-D mode
Stapling operation
With the finisher installed
Offset operation
With the finisher installed
MFP PWB DIP SW
USB I/F
SW 1
SW 2
Port on the front
frame side
Port on the rear
frame side
OFF
OFF
Valid
Valid
OFF
ON
Valid
Valid
SW1
ON
OFF
SW2
Click on the first or last page to see other MX-B382 (serv.man7) service manuals if exist.