MX-B201D (serv.man9). Service Manual (October 2011). - Sharp Copying Equipment Service Manual (repair manual). Page 126

MX-B201/B201D  USER PROGRAM  12 - 5

1) Press the [MENU] key and then press the [OK] key. 

In printer mode, the user programs are accessed by simply
pressing the [MENU] key.

2) Press the [

] key (

) or [

] key (

) to select the item

that you wish to configure in the USER PROGRAM items, and
then press the [OK] key.

• See "USER PROGRAM" for the program name and program

code.

• You can also select a program by directly entering the pro-

gram number with the numeric keys.

3) Press the [

] key (

) or [

] key (

) to change the set-

ting of the selec ted item.
See "USER PROGRAM" for the program code.

Note:

• If you mistakenly select the wrong item, press the [CLEAR]

key (

) and repeat the procedure from step 2.

• To cancel a setting for a user program, press the [MENU] key.

4) Press the [OK] key.

Your selection appears briefly and then the previous screen
appears.

Note: When "AE LEVEL ADJUST" is selected in the user

programs and the [OK] key is pressed, the automatic
exposure adjustment screen appears. Adjust the
exposure and press the [OK] key.

The machine sounds three different types of beep signals: a key
entry beep that sounds when a valid key is pressed, an invalid key
beep that sounds when an invalid key is pressed, and a base setting
beep that sounds when a setting is the same as the base setting
(base settings are explained below). The base setting beep is ini-
tially disabled.

The beep patterns of each type of beep signal are as follows:

Key entry beep: One beep

Invalid key beep: Two beeps

Base setting beep: Three beeps

The base settings are preset standard selections for each copy set-
ting. The base settings are as follows:

Copy ratio: 100%

Light and Dark level: Center

Paper feed location: Paper tray

AUTO/TEXT/PHOTO: AUTO

MAIN MENU
1:USER PROGRAM

USER PROGRAM
2:PREHEAT MODE

PREHEAT MODE
2:1 MIN