MX-B201D (serv.man9). Service Manual (October 2011). - Sharp Copying Equipment Service Manual (repair manual). Page 122

MX-B201/B201D  USER PROGRAM  12 - 1

The user settings allow you to customize machine settings to better meet your needs.

The user settings consist of the following items.
To change the user program settings as explained in "SELECTING A SETTING FOR A USER PROGRAM".

Program 

number

Program name

Setting codes 

(factory default setting 

appears in bold)

Explanation

1

AUTO CLEAR

1: 10 SEC.
2: 30 SEC.
3: 60 SEC.
4: 90 SEC.
5: 120 SEC.
6: OFF

• Auto clear time automatically returns the copy settings to the initial set-

tings if no keys are pressed for a preset period of time following the end of
a copy job. 

• This program is used to select the period of time. Auto clear time can also

be disabled.

2

PREHEAT MODE

1: 30 SEC.
2: 1 MIN.
3: 5 MIN.
4: 30 MIN.
5: 60 MIN.
6: 120 MIN.
7: 240 MIN.

• This function automatically switches the machine to a low power con-

sumption state if the set duration of time elapses without the machine
being used when the power is on. The power save indicator lights up,
however, the keys on the operation panel can be used. Normal operation
automatically resumes when a key on the operation panel is pressed, an
original is placed, a print job is received.

3

AUTO  SHUT-OFF

1: ON 
2: OFF

• Use this setting to enable or disable auto power shut-off mode.

4

AUTO SHUT-OFF TIME

1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.

• This function automatically switches the machine to a state that consumes

even less power than preheat mode if the set duration of time elapses
without the machine being used when the power is on. All lights except
the power save indicator go off. To resume normal operation, press the
[START] key (

). Normal operation also resumes automatically when a

print job is received or scanning is begun from a computer. While in auto
power shut-off mode, no keys (except the [START] key (

)) can be

used.

7

LAYOUT IN 2IN1

1: PATTERN 1 
2: PATTERN 2

• Use this setting to select the layout pattern when two original pages are

copied onto a single sheet of paper.

8

OFFSET FUNCTION

1: ON 
2: OFF

• When enabled, this function offsets the position in the paper output tray of

sets of copies during copy job, and print jobs when using the printer func-
tion.

9

ROTATE ORIG.IMAGE

1: ON 
2: OFF

• When two-sided copying is performed, this function rotates the image on

the back of the original. This is convenient when binding the copies at the
top (tablet binding).

10

AE/TEXT 
RESOLUTION

1: 300dpi 
2: 600dpi

• This setting is used to change the copy resolution in AUTO and TEXT

mode from 600 x 300 dpi to 600 x 600 dpi (highquality mode). Scanning is
slower when high-quality mode is used.

11

2-SIDED COPY MODE

1: HI-SPEED 
2: NORMAL

• If the memory fills up when two-sided copying is performed, "NORMAL"

can be selected to make copying possible. However, "NORMAL" results in
a slower copying speed. Normally "HISPEED" is selected to enable fast
two-sided copying.

12

MARGIN WIDTH

1: 5 mm 
2: 10 mm 
3: 15 mm 
4: 20 mm

• Use this setting to set the margin width.

13

MEM. FOR PRINTER

1: 30% 
2: 40% 
3: 50% 
4: 60% 
5: 70%

• Use this to change the proportion of machine memory used for printer

mode.

14

AUTO KEY REPEAT

1: ON 
2: OFF

• Use this setting to select whether or not holding down a key causes

repeated input of the key. For keys that normally cause a set value to
increase when held down (for example, holding down the [

] key (

)

or [

] key (

)), this program can be used to have the set value not

change when the key is held down.

15

KEY PRESS TIME

1: NORMAL 
2: 0.5 SEC. 
3: 1.0 SEC. 
4: 1.5 SEC. 
5: 2.0 SEC.

• Use this setting to select how long a key must be pressed for the input to

be accepted. By selecting a longer time, you can prevent settings from
being changed by the accidental pressing of a key.