Read Sharp MX-B201D (serv.man9) Service Manual online
MX-B201/B201D SIMULATION, TROUBLE CODES 10 - 41
66
18
DTMF signal send
(Soft SW set value)
(When MX-FX12 is installed)
(Soft SW set value)
(When MX-FX12 is installed)
[Function]
Use to set the DTMF signal send (Soft SW set value).
Use to set the DTMF signal send (Soft SW set value).
[Operation]
21
FAX information print
(When MX-FX12 is installed)
(When MX-FX12 is installed)
[Function]
Use to print the FAX information.
Use to print the FAX information.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
1
1) Initial display
* [Clear] key: FAX control is terminated.
2) [Numeric] key: Input
The content selected with signal send
level selection is set inside.
level selection is set inside.
3) Communication is started after setting the
signal send level.
* [Clear] key: Returns to "1) Initial display".
INPUT DIAL #
SENDING SIGNAL SSW
PRESS CLEAR TO STOP
1) Initial display
2) [
] [
] key or after 2sec
Every time when [
] key is pressed, the second line is changed in the sequence of 1
→ 2
→ 3 → 1.
When [
When [
] key is pressed, the sequence is reversed.
∗ [Clear] key: FAX control is terminated.
3) [OK] key
• When print is allowed
After completion of printing,
FAX control is terminated.
FAX control is terminated.
• When print is inhibited
After 2sec, FAX control is
terminated.
terminated.
SELECT REPORT (1-3)
PRESS
←, →
SELECT REPORT (1-3)
1:USER SW. LIST
SELECT REPORT (1-3)
2:SOFT SW. LIST
SELECT REPORT (1-3)
3:PROTOCOL
PRINT STORED
CAN NOT PRINT
：'11/Oct/17
1
Click on the first or last page to see other MX-B201D (serv.man9) service manuals if exist.