Read Sharp MX-B201D (serv.man9) Service Manual online
MX-B201/B201D SIMULATION, TROUBLE CODES 10 - 36
64
01
Self print
[Function]
The status of the optical section is ignored and printing of one page is made. Also when the
print command is received from the host, printing is made.
The status of the optical section is ignored and printing of one page is made. Also when the
print command is received from the host, printing is made.
When this simulation is executed, warm-up is performed and the ready lamp is lighted. (Since,
however, the scanner is disabled, initializing is not made.)
however, the scanner is disabled, initializing is not made.)
Enter the code number and press [ENTER/[START] key to start paper feed from the selected
cassette and print in the selected pattern.
cassette and print in the selected pattern.
* For 4 – 99, flip.
[Operation]
The operation is similar to simulation 26-02.
The operation is similar to simulation 26-02.
66
01
FAX soft SW setting
(When MX-FX12 is installed)
(When MX-FX12 is installed)
[Function]
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.
[Operation]
02
FAX soft SW initializing
(excluding the adjustment
values)
(When MX-FX12 is installed)
(excluding the adjustment
values)
(When MX-FX12 is installed)
[Function]
Use to initializing FAX soft SW.
Use to initializing FAX soft SW.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
Code number
Pattern
Display item
0
1by2
1 BY 2
1
Grid pattern
CHECK
2
White paper
WHITE
3
Black background
BLACK
1
1) Initial display
* [Clear] key: FAX control is terminated.
2) Enter a 3-digit value of soft SW No. (To
enter the fourth digit, shift to the left.),
and the press [OK] key.
and the press [OK] key.
"xxxxxxxx" is the set content.
* Select 2: Returns to the soft SW No. entry
display.
3) Select 1
4) Change with 1-8 of [Numeric] key and
the press [OK] key.
"xxxxxxxx" is the set content.
* Select 2: Returns to the soft SW No. entry
display.
5) Select 1
After 2sec, returns to "1) Initial display".
ENTER FAX SOFT SW. #
(3 DIGITS) SW.___
No.### xxxxxxxx
CHANGE? 1:YES 2:NO
No.### xxxxxxxx
USE # KEY 12345678
No.### xxxxxxxx
STORED? 1:YES 2:NO
STORED
1) Initial display
After 2sec, FAX control is terminated.
INITIALIZED
：'11/Oct/17
1
Click on the first or last page to see other MX-B201D (serv.man9) service manuals if exist.