Read Sharp MX-B201D (serv.man9) Service Manual online
MX-B201/B201D SIMULATION, TROUBLE CODES 10 - 40
:'11/Oct/17
1
66
13
Dial test
(When MX-FX12 is installed)
(When MX-FX12 is installed)
[Function]
Use to the dial test.
Use to the dial test.
[Operation]
17
DTMF signal send
(Max. value)
(When MX-FX12 is installed)
(Max. value)
(When MX-FX12 is installed)
[Function]
Use to set the DTMF signal send (Max. value).
Use to set the DTMF signal send (Max. value).
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
1
■ Dial test (PULSE)
1) Initial display
1) Initial display
* [Clear] key: FAX control is termi-
nated.
2) Select 1
3) Enter the make time in 2 digits.
* After deleting with [Clear] key, input
can be made.
4) [OK] key
"yy" is the selected pulse 10 or 20.
"xx" is the input value.
* Select 2: Returns to “2)” display.
5) Select 1
Switched to 10/20PPS set with
pulse selection inside.
pulse selection inside.
6) After setting
7) After completion of sending
* Select 2: Returns to “4)” display.
8) Select 1
After 2sec, returns to "1) Initial display".
SELECT SIGNAL
1:PULSE 2:DTMF
INPUT MAKE TIME
(0-15) __
INPUT DIAL #
SEND yyPPS xxms
1:YES 2:NO
SENDING yyPPS xxms
TERMINATE ?
1:YES 2:NO
TERMINATED
■ Dial test (DTMF)
1) Initial display
1) Initial display
* [Clear] key: FAX control is terminated.
2)
Select 2
↓ Select 2
3)
Select 1
↓
↓ Select 2
4) Select 1
↓
* After deleting with [Clear] key, input can be
made.
4) [OK] key
"xx" indicates HI, and "yy" indicates Low Soft SW.
* Select 2: Returns to “4)” display.
5) Select 1
HI/LO is selected with the signal level inside.
6) After setting the signal send level
7) After completion of sending
* Select 2: Returns to “4)” display.
8) Select 1
After 2sec, returns to "1) Initial display".
SELECT SIGNAL
1:PULSE 2:DTMF
SELECT HIGH LEVEL
1:DEFAULT 2:SOFT SW.
↓
INPUT VALUE
(0-15) __
SELECT LOW LEVEL
1:DEFAULT 2:SOFT SW.
↓
INPUT VALUE
(0-15) __
INPUT DIAL #
H:xx L:yy
1:YES 2:NO
SENDING DTMF
TERMINATE ?
1:YES 2:NO
TERMINATED
1) Initial display
* [Clear] key: FAX control is terminated.
2) [Numeric] key: Input
The content selected with signal send
level selection is set inside.
level selection is set inside.
3) Communication is started after setting the
signal send level.
* [Clear] key: Returns to "1) Initial display".
INPUT DIAL #
SENDING SIGNAL MAX
PRESS CLEAR TO STOP
Click on the first or last page to see other MX-B201D (serv.man9) service manuals if exist.