MX-6500N, MX-7500N (serv.man10). Installation Manual (Revised May 2017). - Sharp Copying Equipment Service Manual (repair manual). Page 18

MX-7500N  MX-7500N/6500N (MAIN UNIT)  2 – 8

2)

Open the cover.

3)

Insert the toner cartridge out slowly and horizontally.

NOTE: Be sure to install the toner cartridge to their proper

positions. Avoid installation to a different color position.

NOTE: Do not forcibly insert the toner cartridge.

Keep holding the toner cartridge and completely insert
it.

NOTE: When the machine is transported, be sure to remove

the toner cartridge. (If not, toner may be clogged.)

NOTE: Dust from the transfer belt or shutter or some other adja-

cent part may fall onto the LSU during transport or installa-
tion. Be sure to clean the dust-proof glass before checking
the image quality.

1)

Open the front cover.

2)

Detach the LSU cleaning bar from the front cover.

3)

Turn the felt side of the cleaning bar downward and insert it.
Slide it back and forth a few times to clean the LSU dust-proof
glass.

4)

Replace the LSU claning bar to the front cover, and close the
front cover.

1)

Touch the [Paper Tray Settings] key.

2)

Touch the [Paper Tray Settings] key to configure the settings.
These settings specify the paper type, paper size, and func-
tions allowed for each paper tray. When the [Tray Settings] key
is touched, a list appears showing the trays and the current
settings.

3)

Touch the [Change] key in the above screen to change the set-
tings. The following settings can be configured.

Type

Select the type of paper that is loaded in the tray. 
The paper types that can be selected vary by paper 
tray.

Size

Select the paper size from the list. The paper sizes 
that can be selected vary by tray. The sizes that 
can be selected may also be restricted by the paper 
type selected above. 
If the desired size does not appear in the list, select 
[Custom Size] and directly enter the size (only for 
the bypass tray).

Feeding Approved 
Job

Select the modes that can be used. If there is a 
function that you do not wish to be used with the 
selected tray, disable the function. When the "Type" 
is other than plain paper, recycled paper, colored 
paper, or a user type, [Fax] and [Internet Fax] 
cannot be selected.