Read Sharp MX-6500N / MX-7500N (serv.man10) Service Manual online
MX-7500N MX-7500N/6500N (MAIN UNIT) 2 – 6
5)
Remove the screw, and remove the DV cover.
6)
Infuse the developer in the DV unit.
NOTE: When supplying developer, rotate the coupling pulley
in the DV unit rear side in the arrow direction during
the operation.
the operation.
NOTE: Keep the DV unit with developer in it horizontally.
Since this unit employs the trickle development
method, if the DV unit is tilted, developer may fall into
the waste toner transport section because of its struc-
ture.
method, if the DV unit is tilted, developer may fall into
the waste toner transport section because of its struc-
ture.
7)
Attach the DV cover, and fix the screw.
Note for attaching the DV cover
When attaching the DV cover, be careful of the following items:
NOTE: Insert the convex portion in the angle shown below.
NOTE: Turn the cover to attach.
NOTE: Check to confirm that three convex portions are
securely engaged.
1
1
2
2
2
1
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man10) service manuals if exist.