Read Sharp MX-6240N / MX-7040N (serv.man17) Service Manual online
MX-7040N ADJUSTMENTS AND SETTINGS 5 – 61
2) Select the mode to be adjusted with the scroll key.
3) Input numeric value corresponding to sharpness level (filter
process mode).
- Adjustment item A:
- Adjustment item A:
When selecting AUTO, filter is selected according to dot pat-
tern state automatically and adjusts sharpness.
Input small numeric value to obtain crispy image. Input large
numeric value to decrease moire.
tern state automatically and adjusts sharpness.
Input small numeric value to obtain crispy image. Input large
numeric value to decrease moire.
- Adjustment item B:
Select HIGH to obtain clear images. Select SOFT to reduce
moire.
moire.
- Adjustment item C - J:
When setting ON, smoothness in the image shade part
improves by applying soft filter. (asperity decreases)
improves by applying soft filter. (asperity decreases)
4) Press [OK] key.
5) Make a copy and check the copy image.
If a satisfactory result is not obtained, return to the SIM 46-60 mode
and change the adjustment value.
Repeat the above procedures until a satisfactory result is obtained.
5) Make a copy and check the copy image.
If a satisfactory result is not obtained, return to the SIM 46-60 mode
and change the adjustment value.
Repeat the above procedures until a satisfactory result is obtained.
9-D
(12)
Copy high density image density
reproduction setting (Normally
unnecessary to the setting change)
Copy high density image density
reproduction setting (Normally
unnecessary to the setting change)
If a tone gap occurs on part of high density in copy mode, or if there
is necessity to increase the density of the part of high density,
change the setting.
This setting is normally not required. When, however, there are
case of following, change the setting.
* When a tone gap occurs on part of high density.
* When there is a necessity to increase the density of the part of
is necessity to increase the density of the part of high density,
change the setting.
This setting is normally not required. When, however, there are
case of following, change the setting.
* When a tone gap occurs on part of high density.
* When there is a necessity to increase the density of the part of
high density.
* When there is request from the user.
a. Adjustment procedure
1)
1)
Enter the SIM 46-23 mode.
Display/Item
Content
Setting range
Default
NOTE
A
SCREEN FILTER
LEVEL
LEVEL
H
Sharpness (filter) adjustment of dot pattern
image in auto copy mode
image in auto copy mode
Strong emphasis
1
3 (Auto)
Apply to auto copy mode
only
only
L
Soft emphasis
2
AUTO
Auto
3
B
AUTOMODE
FILTER LEVEL
FILTER LEVEL
SOFT
Sharpness (filter) adjustment for the auto
copy mode
copy mode
SOFT
1
2
(CENTER)
CENTER
CENTER
2
HIGH
HIGH
3
C
COLOR COPY:
CMY
CMY
OFF
Soft filter applying setting to C, M, Y image
in color copy mode
in color copy mode
OFF
0
1 (ON)
Available for the high
density image except
text and line image
density image except
text and line image
ON
ON
1
D
COLOR COPY:K
OFF
Soft filter applying setting to K image in
color copy mode
color copy mode
OFF
0
1 (ON)
ON
ON
1
E
SINGLE COLOD:
CMY
CMY
OFF
Soft filter applying setting to C, M, Y image
in single color copy mode
in single color copy mode
OFF
0
1 (ON)
When setting ON,
smoothness in the image
shade part improves by
applying soft filter.
(asperity decreases)
smoothness in the image
shade part improves by
applying soft filter.
(asperity decreases)
ON
ON
1
F
2 COLOR COPY:
CMY
CMY
OFF
Soft filter applying setting to C, M, Y image
in 2-color copy mode
in 2-color copy mode
OFF
0
1 (ON)
ON
ON
1
G
2 COLOR COPY:
K
K
OFF
Soft filter applying setting to K image in
color copy mode
color copy mode
OFF
0
1 (ON)
ON
ON
1
H
B/W COPY
OFF
Soft filter applying setting in monochrome
copy mode
copy mode
OFF
0
1 (ON)
ON
ON
1
I
COLOR PUSH:
RGB
RGB
OFF
Soft filter applying setting to image in push
scan color mode
scan color mode
OFF
0
1 (ON)
ON
ON
1
J
B/W PUSH
OFF
Soft filter applying setting to image in push
scan monochrome mode
scan monochrome mode
OFF
0
1(ON)
ON
ON
1
OK
10-key
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(1*,1(0$;,080'(16,7<$'-8670(1702'(
$˖
˷̚˹
˖&0<˄(1$%/(ǂ˖',6$%/(˅
$˖
˖.˄(1$%/(ǂ˖',6$%/(˅
%˖
˖&<$1ǂ0$;ǂ7$5*(7
&˖
˖0$*(17$ǂ0$;ǂ7$5*(7
'˖
˖%/$&.ǂ0$;ǂ7$5*(7
)˖
˖<(//2:ǂ0$;ǂ7$5*(7
(˖
2.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(1*,1(0$;,080'(16,7<$'-8670(1702'(
$˖
˷̚˹
˖&0<˄(1$%/(ǂ˖',6$%/(˅
$˖
˖.˄(1$%/(ǂ˖',6$%/(˅
%˖
˖&<$1ǂ0$;ǂ7$5*(7
&˖
˖0$*(17$ǂ0$;ǂ7$5*(7
'˖
˖%/$&.ǂ0$;ǂ7$5*(7
)˖
˖<(//2:ǂ0$;ǂ7$5*(7
(˖
2.
Click on the first or last page to see other MX-6240N / MX-7040N (serv.man17) service manuals if exist.