Read Sharp MX-6201N / MX-7001N (serv.man37) Service Manual online
MX-7001N TRANSFER SECTION M – 12
3)
Remove the screw (C). Hold the drum fixing knob (D) by the
hand to not rotate, remove the screw (E). Remove the drum
fixing knob (D).
hand to not rotate, remove the screw (E). Remove the drum
fixing knob (D).
4)
Pull out the fixing cover (F).
5)
Loosen the screws (G), and open the cover (H) of the process
section.
section.
6)
Remove the screw (I), and pull out the PTC unit (J) straight.
* When installing, be careful to prevent damage of the primary
transfer belt where right side (K) of the PTC unit is a cause.
* When installing, check that rails (L) is engaged.
a. PTC cleaner B, PTC cleaner
1)
Remove the paper dust removal cleaner. (Refer to the “[G]
PAPER TRANSPORT SECTION”.)
PAPER TRANSPORT SECTION”.)
2)
Remove the PTC unit. (Refer to the "(1) PTC unit".)
3)
After disengaging the pawl (A), disengage the pawl (B).
Remove the holder cover (C).
Remove the holder cover (C).
D
C
E
F
G
G
H
J
I
1
Unit
Parts
Mainte
nance
1
PTC unit
a
PTC cleaner B
✕ ▲
b
PTC cleaner
✕ ▲
K
L
L
1-b
1-a
A
B
C
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man37) service manuals if exist.