Read Sharp MX-6201N / MX-7001N (serv.man37) Service Manual online
MX-7001N TRANSFER SECTION M – 11
1)
Remove the secondary transfer unit. (Refer to the "(1) Second-
ary transfer unit".)
ary transfer unit".)
2)
Remove the secondary transfer belt. (Refer to the "a. Second-
ary transfer idle gear, secondary belt follower roller, secondary
transfer belt".)
ary transfer idle gear, secondary belt follower roller, secondary
transfer belt".)
3)
Remove the C-ring (A). Remove the secondary belt drive roller
(B). Remove the C-ring (C), and the bearings (D) from the sec-
ondary belt drive roller (B).
(B). Remove the C-ring (C), and the bearings (D) from the sec-
ondary belt drive roller (B).
d. Secondary belt tension roller
1)
Remove the secondary transfer unit. (Refer to the "(1) Second-
ary transfer unit".)
ary transfer unit".)
2)
Remove the secondary transfer belt. (Refer to the "a. Second-
ary transfer idle gear, secondary belt follower roller, secondary
transfer belt".)
ary transfer idle gear, secondary belt follower roller, secondary
transfer belt".)
3)
Remove the bearings (A) and springs (B), and remove the sec-
ondary belt tension roller (C).
ondary belt tension roller (C).
C. PTC unit
(1) PTC unit
1)
Remove the paper dust removal cleaner. (Refer to the “[G]
PAPER TRANSFER SECTION”.)
PAPER TRANSFER SECTION”.)
2)
Turn the blue screw (A) counterclockwise. Check that the lock
is released as shown in (B).
* Failure to complete this step may damage the primary trans-
is released as shown in (B).
* Failure to complete this step may damage the primary trans-
fer belt.
Unit
Parts
Mainte
nance
1
Secondary transfer
unit
unit
f
Secondary belt tension roller
✕ {
A
C
E
B
1-e
D
1-f
A
C
B
A
B
1-f
Unit
Parts
Mainte
nance
Page
1
PTC unit
a
PTC cleaner B
✕ ▲
M -12
b
PTC cleaner
✕ ▲
c
Charger wire
✕ ▲
M -13
Parts
1
PTC unit
1-b
1-c
1-a
1
1
A
B
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man37) service manuals if exist.