Read Sharp MX-6201N / MX-7001N (serv.man31) Service Manual online
MX-7001N PAPER TRANSPORT SECTION G – 12
3)
Disconnect the connector (C). Remove the screws (D), and
remove the earth wire (E) and LCC transport unit (F).
remove the earth wire (E) and LCC transport unit (F).
a. Transport roller 14 (Drive)
1)
Remove the right lower door, the right cabinet lower, and the
LCC lower cabinet. (Refer to the "[A] EXTERNAL OUTFIT".)
LCC lower cabinet. (Refer to the "[A] EXTERNAL OUTFIT".)
2)
Remove the LCC transport unit. (Refer to the "(1) LCC trans-
port unit".)
port unit".)
3)
Disengage the pawls (A), and remove the cover (B).
4)
Remove the E-ring (C), the gear (D), the parallel pin (E), and
the gear collar (F). Remove the E-rings (G), and remove the
bearing (H).
the gear collar (F). Remove the E-rings (G), and remove the
bearing (H).
5)
Remove the E-ring (I), and remove the bearing (J). Remove
the transport roller 14 (Dirve) (K).
the transport roller 14 (Dirve) (K).
b. Transport roller 15 (Dirve)
1)
Remove the right lower door, the right cabinet lower, and the
LCC lower cabinet. (Refer to the "[A] EXTERNAL OUTFIT".)
LCC lower cabinet. (Refer to the "[A] EXTERNAL OUTFIT".)
2)
Remove the LCC transport unit. (Refer to the "(1) LCC trans-
port unit".)
port unit".)
Unit
Parts
Mainte
nance
1
LCC transport unit
a
Transport roller 14 (Drive)
✕ {
D
D
F
C
D
E
1
1-a
A
A
B
Unit
Parts
Mainte
nance
1
LCC transport unit
b
Transport roller 15 (Drive)
✕ {
C
D
E
F
H
G
I
J
K
1-a
1-b
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man31) service manuals if exist.