Read Panasonic KX-TS2350UAJ / KX-TS2350UAS / KX-TS2350UAT Service Manual online
ORDER NO. KM40710449CE
Telephone Equipment
KX-TS2350UAJ
KX-TS2350UAS
KX-TS2350UAT
KX-TS2350UAS
KX-TS2350UAT
Integrated Telephone System
Ivory Version
Silver Version
Titanium Version
(for Ukraine)
Silver Version
Titanium Version
(for Ukraine)
2
KX-TS2350UAJ/KX-TS2350UAS/KX-TS2350UAT
3
KX-TS2350UAJ/KX-TS2350UAS/KX-TS2350UAT
TABLE OF CONTENTS
PAGE
1 Safety Precautions----------------------------------------------- 4
1.1. For Service Technicians --------------------------------- 4
2 Warning -------------------------------------------------------------- 4
2.1. About Lead Free Solder (Pbf: Pb free)--------------- 4
2.2. Discarding of P. C. Board-------------------------------- 5
2.2. Discarding of P. C. Board-------------------------------- 5
3 Specifications ----------------------------------------------------- 5
4 Technical Descriptions ----------------------------------------- 6
4 Technical Descriptions ----------------------------------------- 6
4.1. Block Diagram---------------------------------------------- 6
4.2. Circuit Operation------------------------------------------- 7
4.2. Circuit Operation------------------------------------------- 7
5 Location of Controls and Components ------------------- 9
5.1. Controls ------------------------------------------------------ 9
6 Installation Instructions ---------------------------------------- 9
6.1. Connections------------------------------------------------- 9
7 Operation Instructions-----------------------------------------10
7.1. Troubleshooting-------------------------------------------10
8 Troubleshooting Guide ----------------------------------------11
8.1. Service Hints-----------------------------------------------11
8.2. Pulse Dialing Problems ---------------------------------11
8.3. Problems with the Handset ----------------------------12
8.4. Tone Dialing Problems ----------------------------------12
8.5. Problems with Ringer------------------------------------13
8.6. How to Check the IC1 (Scanning to the key)------14
8.2. Pulse Dialing Problems ---------------------------------11
8.3. Problems with the Handset ----------------------------12
8.4. Tone Dialing Problems ----------------------------------12
8.5. Problems with Ringer------------------------------------13
8.6. How to Check the IC1 (Scanning to the key)------14
9 Disassembly and Assembly Instructions ---------------15
10 Measurements and Adjustments---------------------------16
10.1. Option Jumper Table-------------------------------------16
11 Schematic Diagram ---------------------------------------------17
11.1. For Schematic Diagram---------------------------------17
11.2. Schematic Diagram --------------------------------------18
11.2. Schematic Diagram --------------------------------------18
12 Printed Circuit Board-------------------------------------------21
12.1. Circuit Board (Main)--------------------------------------21
12.2. Circuit Board (Operation) -------------------------------23
12.2. Circuit Board (Operation) -------------------------------23
13 Appendix Information of Schematic Diagram ---------24
13.1. CPU Data --------------------------------------------------24
13.2. Terminal Guide of the ICs, Transistors and
13.2. Terminal Guide of the ICs, Transistors and
Diodes -------------------------------------------------------25
14 Exploded View and Replacement Parts List -----------26
14.1. Cabinet and Electrical Parts --------------------------26
14.2. Accessories and Packing Materials------------------27
14.3. Replacement Part List-----------------------------------28
14.2. Accessories and Packing Materials------------------27
14.3. Replacement Part List-----------------------------------28
4
KX-TS2350UAJ/KX-TS2350UAS/KX-TS2350UAT
1 Safety Precautions
1.1.
For Service Technicians
• Repair service shall be provided in accordance with repair technology information such as service manual so as to pre-
vent fires, injury or electric shock, which can be caused by improper repair work.
1. When repair services are provided, neither the products nor their parts or members shall be remodeled.
2. If a lead wire assembly is supplied as a repair part, the lead wire assembly shall be replaced.
3. FASTON terminals shall be plugged straight in and unplugged straight out.
2. If a lead wire assembly is supplied as a repair part, the lead wire assembly shall be replaced.
3. FASTON terminals shall be plugged straight in and unplugged straight out.
• ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on worktable.
4. Do not grasp IC or LSI pins with bare fingers.
2. Ground the soldering irons.
3. Use a conductive mat on worktable.
4. Do not grasp IC or LSI pins with bare fingers.
2 Warning
2.1.
About Lead Free Solder (Pbf: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con-
tains lead.
We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver (Ag), and Copper (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
tains lead.
We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver (Ag), and Copper (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
Caution
• PbF solder has a melting point that is 50
°F ~ 70 °F (30 °C ~ 40 °C) higher than Pb solder. Please use a soldering iron with
temperature control and adjust it to 700
°F ± 20 °F (370 °C ± 10 °C).
• Exercise care while using higher temperature soldering irons.:
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100
°F (600 °C).
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See the figure below).