Read Sharp MX-6201N / MX-7001N (serv.man31) Service Manual online
MX-7001N PAPER TRANSPORT SECTION G – 10
4)
Remove the screws (A), and remove the support plate (B).
5)
Remove the E-ring (C), the gear (D), the parallel pin (E), and
the gear collar (F). Remove the E-rings (G), and remove the
bearing (H).
the gear collar (F). Remove the E-rings (G), and remove the
bearing (H).
6)
Remove the screw (I), and remove the earth plate (J). Remove
the E-ring (K), and remove the bearing (L). Remove the trans-
port roller 6 (Drive) (M).
the E-ring (K), and remove the bearing (L). Remove the trans-
port roller 6 (Drive) (M).
c. Tandem tray 2 transport detector
1)
Remove the right lower door, the right cabinet lower, and the
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
2)
Remove the waste toner box. (Refer to the “[J] PHOTOCON-
DUCTOR SECTION”.)
DUCTOR SECTION”.)
3)
Remove the vertical transport unit. (Refer to the "(1) Vertical
transport unit".)
transport unit".)
4)
Remove the screws (A), and remove the support plate (B).
5)
Disconnect the connector (C). Remove the screw (D), and
remove the tandem tray 2 transport detector (E).
remove the tandem tray 2 transport detector (E).
A
A
B
C
D
E
F
G
H
I
J
K L
M
1-b
Unit
Parts
1
Vertical transport unit
c
Tandem tray 2 transport detector
1-c
A
A
B
C
D
E
1-c
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man31) service manuals if exist.