Read Sharp MX-6201N / MX-7001N (serv.man31) Service Manual online
MX-7001N PAPER TRANSPORT SECTION G – 8
4)
Remove the screw (A), and remove the tandem tray 1 trans-
port detector 1 (B). Disconnect the connector (C).
port detector 1 (B). Disconnect the connector (C).
d. Tandem tray 1 transport detector 2
1)
Romove the front cabinet, the right lower door, and the right
lower door cover. (Refer to the "[A] EXTERNAL OUTFIT".)
lower door cover. (Refer to the "[A] EXTERNAL OUTFIT".)
2)
Remove the tandem paper feed tray unit. (Refer to the "[F]
TRAY PAPER FEED SECTION".)
TRAY PAPER FEED SECTION".)
3)
Remove the paper pass unit. (Refer to the "(1) Paper pass
unit".)
unit".)
4)
Remove the screws (A), and remove the support plate (B).
5)
Remove the screw (C), and remove the tandem tray 1 trans-
port detector 2 (D). Disconnect the connector (E).
port detector 2 (D). Disconnect the connector (E).
B. Vertical transport unit
(1) Vertical transport unit
1)
Remove the right lower door, the right cabinet lower, and the
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
2)
Remove the waste toner bottle. (Refer to the “[J] PHOTOCON-
DUCTOR SECTION”.)
DUCTOR SECTION”.)
3)
Remove the resin E-ring (A), and remove the right vertical
transport unit (B).
transport unit (B).
Unit
Parts
1
Paper pass unit
d
Tandem tray 1 transport detector 2
A
B
C
1-c
1-d
A
A
B
D
C
E
1-d
Unit
Parts
Mainte
nance
Page
1
Vertical
transport unit
transport unit
a
Transport roller 5 (Drive)
✕ {
G - 9
b
Transport roller 6 (Drive)
✕ {
G - 9
c
Tandem tray 2 transport
detector
detector
–
G -10
d
Right door open/close
detection sensor
detection sensor
–
G -11
Unit
1
Vertical transport unit
1-b
1-a
1-c
1
1-d
1
A
B
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man31) service manuals if exist.