Read Sharp MX-6201N / MX-7001N (serv.man27) Service Manual online
MX-7001N DSPF SECTION C – 23
5)
Remove the screw (F), and remove the intersecting point plate
(G). Remove the lower door (H).
(G). Remove the lower door (H).
6)
Remove the screws (I). Remove the transport PG lower (J).
Disconnect the connector (K).
Disconnect the connector (K).
7)
Disconnect the connector (L), and remove the DSPF paper
pass sensor 5 (M).
pass sensor 5 (M).
8)
Remove the DSPF No.1 resist roller brake clutch and remove
the DSPF No.1 resist roller clutch. (Refer to the "C. Upper
transport section".)
the DSPF No.1 resist roller clutch. (Refer to the "C. Upper
transport section".)
9)
Remove the drive unit. (Refer to the "G. Drive section".)
10) Disconnect the connectors (N). Remove the screws (O), and
remove the control PWB unit (P).
11) Loosen the screw (Q), and loosen the belt (R) tension. Tighten
the screw (Q). Remove the belt (R). Remove the E-ring (S)
and the pulley (T).
and the pulley (T).
12) Remove the E-ring (U). Slide the bearing (V). Remove the
transport roller 2 (drive) (W). Remove the bearing (X), the resin
E-ring (Y), and the spring pin (Z) from the transport roller 2
(drive) (W).
E-ring (Y), and the spring pin (Z) from the transport roller 2
(drive) (W).
H
F
G
K
I
J
I
I
L
M
h
P
N
N
N
N
O
O
S
T
Q
R
W
U
V
Z
X
X
Y
i
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man27) service manuals if exist.