Read Sharp MX-6201N / MX-7001N (serv.man19) Service Manual online
MX-7001N SIMULATION 7 – 120
20
6
FAX
reception
setting
reception
setting
Automatic reduced printing
to fixed sizes
to fixed sizes
1: Discard
0: Reduction
0
Reduction
7
FAX
reception
setting
reception
setting
Setting to reduce and
discard when printing
A3-11 x 17 (reduced printing
setting when receiving A3)
discard when printing
A3-11 x 17 (reduced printing
setting when receiving A3)
1: Discard
0: Reduction
1
Discard
When in reduction,
94% for all.
94% for all.
8
FAX
reception
setting
reception
setting
Reduced print setting when
receiving letters
receiving letters
1: Discard
0: Reduction
1
Discard
21
1 - 4
FAX
reception
setting
reception
setting
Setting of the number of
automatic reception calls
automatic reception calls
Binary input
Setting range
Setting range
Europe/Indonesia/Thailand: 0 to 9 times
Australia/New Zealand: 2 to 4 times
Other country: 0 to 15 times
Australia/New Zealand: 2 to 4 times
Other country: 0 to 15 times
0
2 times
If 0 is set, the call
sound will not be
sounded. (However,
this does not
include the
nighttime FAX
mode.)
sound will not be
sounded. (However,
this does not
include the
nighttime FAX
mode.)
0
1
0
1
0
5
FAX
reception
setting
reception
setting
Double-faced printing of
received data (double-faced
reception setting)
received data (double-faced
reception setting)
1: Double-faced printing
permitted
permitted
0: Double-faced printing
prohibited
prohibited
0
Double-faced
printing prohibited
printing prohibited
6, 7
FAX
reception
setting
reception
setting
Setting of received data
print conditions
print conditions
Equal magnification/
Reduction permitted
Reduction permitted
0 0
0
Equal
magnification/
Reduction
permitted
magnification/
Reduction
permitted
Equal magnification/
Division prohibited/
Reduction prohibited
Division prohibited/
Reduction prohibited
0 1
0
Equal magnification/
Division permitted
Division permitted
1 0
Same action as initial
value
value
1 1
8
FAX
reception
setting
reception
setting
Designated number
reception refusal setting
(FAX)
reception refusal setting
(FAX)
1: Receipt of designated
number is refused (valid)
number is refused (valid)
0: Receipt of designated
number is not refused
(invalid)
number is not refused
(invalid)
0
Receipt of
designated
number is not
refused (invalid)
designated
number is not
refused (invalid)
22
1
FAX
reception
setting
reception
setting
FAX delivery tray setting
(without finisher attached)
(without finisher attached)
1: Right tray
0: Center tray
0
Center tray
FAX delivery tray setting
(with finisher attached)
(with finisher attached)
1: Right tray
0: Finisher tray
Finisher tray
2
(*)
FAX delivery tray setting
(Upper/lower setting when
the 4K finisher is installed)
(Upper/lower setting when
the 4K finisher is installed)
1: Lower tray
0: Upper tray
0
Upper tray
3
Device
setting
setting
Staple setting
1: Yes
0: No
0
No
4, 5
Device
setting
setting
Staple position
Rear 1 point
0 0
0
Rear 1 point
Front 1 point
0 1
0
Center 2 points
1 0
Same action as initial
value
value
1 1
6, 7
FAX
reception
setting
reception
setting
Selection of delivered sheet
size
size
A4 or A3
(8.5 x 11 or 11 x 17)
(8.5 x 11 or 11 x 17)
0 0
0
A4 or A3 (8.5 x 11
or 11 x 17)
or 11 x 17)
B5 or B4
(8.5 x 11 or 8.5 x 14)
(8.5 x 11 or 8.5 x 14)
0 1
0
A4 (8.5 x 11)
1 0
A4R (8.5 x 11R)
1 1
8
Valid/Invalid setting of FAX
A4, letter threshold
A4, letter threshold
1: Invalid
0: Valid
0
Valid
23
1
FAX
reception
setting
reception
setting
Setting for changing over to
automatic reception during
manual reception
automatic reception during
manual reception
1: Permitted
(changeover)
(changeover)
0: Prohibited (do not
changeover)
changeover)
0
Prohibited
The number of calls
is set in "Setting of
the number of calls
for changing over
from manual to
automatic
reception."
is set in "Setting of
the number of calls
for changing over
from manual to
automatic
reception."
2 - 6
FAX
reception
setting
reception
setting
Setting of the number of
calls for changing over from
manual to automatic
reception (Selection setting
from manual reception to
automatic reception)
calls for changing over from
manual to automatic
reception (Selection setting
from manual reception to
automatic reception)
Binary input
1 to 9 times
Setting range
1 time intervals
The number of calls for changing
Set value + 1
0
9 times
Function setting for
"Setting for
changing over to
automatic reception
during manual
reception"
For outside the set
range, the default
value is used.
Functions only in
France.
"Setting for
changing over to
automatic reception
during manual
reception"
For outside the set
range, the default
value is used.
Functions only in
France.
1
0
0
0
0
0
0
SW
No.
No.
Bit
No.
System
settings
Item
SW selection and function
Initial value
Remarks
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man19) service manuals if exist.