Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man55) Service Manual online
MX-7000N DSPF SECTION C – 18
(3) No.1 resist roller (Drive)
1)
Remove the front cabinet and the rear cabinet. (Refer to the
"A. Exterior section".)
"A. Exterior section".)
2)
Remove the paper feed unit. (Refer to the "B. Paper feed sec-
tion".)
tion".)
3)
Remove the DSPF No.1 resist roller brake clutch, and remove
the DSPF No.1 resist roller clutch. (Refer to the "(1) DSPF
No.1 resist roller brake clutch, DSPF No.1 resist roller clutch".)
the DSPF No.1 resist roller clutch. (Refer to the "(1) DSPF
No.1 resist roller brake clutch, DSPF No.1 resist roller clutch".)
4)
Remove the resin E-ring (A), and remove the No.1 resist roller
(idle) (B).
(idle) (B).
5)
Remove the screws (C), lift the paper feed rotation tray (D),
and remove the paper feed PG lower (E).
and remove the paper feed PG lower (E).
6)
Remove the resin E-ring (F) and the bearing (G), and remove
the No.1 resist roller (drive) (H).
the No.1 resist roller (drive) (H).
7)
Remove the E-ring (I) and the bearing (J) from the No.1 resist
roller (drive) (H).
roller (drive) (H).
(4) DSPF paper pass sensor 2, Transport roller 1
(drive)
1)
Remove the front cabinet and the rear cabinet. (Refer to the
"A. Exterior section".)
"A. Exterior section".)
Parts
Mainte
nance
d
No.1 resist roller (Drive)
{
d
B
A
C
C
C
D
E
Parts
Mainte
nance
e
DSPF paper pass sensor 2
–
f
Transport roller 1 (Drive)
{
F
G
H
H
I
J
d
e
f
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man55) service manuals if exist.