Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man55) Service Manual online
MX-7000N DSPF SECTION C – 16
(4) Torque limiter
1)
Remove the front cabinet and the rear cabinet. (Refer to the
"A. Exterior section".)
"A. Exterior section".)
2)
Remove the paper feed unit. (Refer to the "(2) Paper feed
unit".)
unit".)
3)
Remove the DSPF No.1 resist roller brake clutch, and remove
the DSPF No.1 resist roller clutch. (Refer to the "C. Upper
transport section")
the DSPF No.1 resist roller clutch. (Refer to the "C. Upper
transport section")
4)
Remove the drive unit. (Refer to the "G. Drive section.")
5)
Remove the resin E-ring (A), and remove the No.1 resist roller
(idle) (B).
(idle) (B).
6)
Remove the screws (C). Lift the paper feed rotation tray (D),
and remove the paper feed PG lower (E).
and remove the paper feed PG lower (E).
7)
Remove the screws (F), and remove the separation roller sup-
porting plate (G) and the bearing (H). Remove the roller shaft
(I), and remove the torque limiter (J).
porting plate (G) and the bearing (H). Remove the roller shaft
(I), and remove the torque limiter (J).
(5) DSPF paper feed tray lower limit sensor, DSPF
document empty sensor
1)
Remove the front cabinet and the rear cabinet. (Refer to the
"A. Exterior section".)
"A. Exterior section".)
2)
Remove the paper feed tray unit. (Refer to the "(1) Paper feed
tray unit".)
tray unit".)
3)
Disconnect the connectors (A), and remove the DSPF paper
feed tray lower limit sensor (B) and the DSPF document empty
sensor (C).
feed tray lower limit sensor (B) and the DSPF document empty
sensor (C).
Parts
Mainte
nance
b
Torque limiter
✕
b
B
A
C
C
C
D
E
Parts
c
DSPF paper feed tray lower limit sensor
d
DSPF document empty sensor
I
H
G
F
J
b
d
c
A
A
B
C
d
c
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man55) service manuals if exist.