MX-5500N, MX-6200N, MX-7000N (serv.man55). DSPF Section-Detailed section - Sharp Copying Equipment Service Manual (repair manual). Page 15

MX-7000N  DSPF SECTION  C – 15

4)

Disconnect the connector (C). Remove the screws (D), and
remove the paper feed PG upper supporting plate (E).

5)

Remove the E-ring (F) and the bearing (G). Lift the paper feed
roller shaft (H) diagonally, and remove the DSPF paper feed
clutch (I).
* When installing, check to insure that the clutch rotation stop-

per is engaged with the plate.

1)

Remove the paper feed cover. (Refer to the "A. Exterior sec-
tion".)

2)

Disengage the pawl (A), and remove the paper feed PG upper
cover (B).

3)

Remove the screw (C), and remove the paper feed PG lower
cover (D).

4)

Disengage the pawl (E), and remove the reverse pressure
release lever (F). Remove the separation roller (G).

a

Separation roller

{