AR-405 (serv.man4). AR405 Service Manual-General - Sharp Copying Equipment Service Manual (repair manual)

ar-405 (serv.man4) service manual
Model
AR-405 (serv.man4)
Pages
7
Size
217.75 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / AR405 Service Manual-General
File
ar-405-sm4.pdf
Date
Next: Sharp AR-405 (serv.man5) Service Manual

Read Sharp AR-405 (serv.man4) Service Manual online

CODE: 00ZAR405//A1E
Digital Copier
AR-280
AR-285
AR-335
MODEL
AR-405
Parts marked with "
!
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
AR-405
[ 1 ] GENERAL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3-A
[ 2 ] SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
[ 3 ] OPTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
[ 4 ] CONSUMABLE PARTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
[ 6 ] EXTERNAL VIEW AND INTERNAL STRUCTURE  . . . . . . . . . 6-10
[ 7 ] SETTING AND ADJUSTMENTS  . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[ 8 ] SIMULATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
[ 9 ] MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1-A
[10] DISASSEMBLY AND ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . 10-1
[11] TROUBLE CODE LIST  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
CONTENTS
No.
AR-280/285/335
AR-405
Page
Section
Content
Change
Remark
1 – 1
[1] – 1
A.
Touch panel
Display change
(Refer to the section
of Touch panel in
EXTERNAL VIEW
AND INTERNAL
STRUCTURE.)
1 – 1
[1]
C.
Automatic document feeder as standard
provision
C.
Automatic document feeder as standard
provision
Without opening the document table cover, documents
can be automatically fed and copied.
The automatic document feeder provided in the
AR-285/335 allows automatic reversion of documents
for duplex copying as well as simplex copying. (The
automatic document feeder of the AR-280 allows only
simplex copying.)
Without opening the document table cover, documents
can be automatically fed and copied.
The automatic document feeder provided in the AR-405
allows automatic reversion of documents for duplex
copying as well as simplex copying.
E.
776-step zooming
E.
376-step zooming
The zooming function allows selection of the
magnification ratio from 25% to 800% in 776 steps (1%
increment). (When the automatic document feeder
(AR-280) is used, zooming from 25% to 200% in 176
steps (1% increment) is allowed.)
The zooming function allows selection of the
magnification ratio from 25% to 400% in 376 steps (1%
increment). (When the automatic document feeder.)
1 – 6
System outline (Options)
(Refer to the attached sheet.)
2 – 1
[2]
SPECIFICATIONS
(Refer to the attached sheet.)
3 – 1
[3]
Option spec
(Refer to the attached sheet.)
3 – 3
4 – 1
[4] – 1 – A
(Refer to the attached sheet.)
4 – 2
[4] – 1 – B
4 – 3
[4] – 1 – C
4 – 4
[4] – 1 – D
4 – 5
[4] – 1 – E
4 – 6
[4] – 4 – A
Manufacturing No. identification
illustration and description of Manufacturing No.
are changed.
5 – 3
[5] – 2 – C C.
Charger cleaning
•
Main charger unit electrode cleaning
1
Open the front cabinet. 
2
Press the hook section of the main charger
unit to release lock. Pull out and remove the
main charger unit from the copier body. 
illustration (Drum positioning plate shape)
change
AR-405
1/21/1999
– 1 –
No.
AR-280/285/335
AR-405
Page
Section
Content
Change
Remark
5 – 4
[5] – 2 – C
Illustration (Drum positioning plate shape)
change
•
Transfer/separation charger unit wire cleaning
•
Transfer/separation charger unit wire cleaning
1
Slightly lift the transport section open/close
lever and tilt it to the right.
1
Slightly lift the transport section open/close
lever and tilt it to the right.
2
Remove the driver transfer separation
charger fixing screw, and remove the
transfer/separation charger unit from the
copier body.
2
Remove the driver transfer separation
charger fixing screw, and remove the
transfer/separation charger unit from the
copier body.
5 – 6
[5] – 2 – 6
Illustration (Drum positioning plate shape)
change
G.
Developing unit setting
G. Developing unit setting
(1) Remove the developing unit.
(1) Remove the developing unit.
1
Open the front cabinet.
1
Open the front cabinet.
2
Tilt the developing unit lever toward you,
and pull out the toner cartridge until it stops.
2
Tilt the developing unit lever toward you,
and pull out the toner cartridge until it stops.
Printer kit AR-PB2 installation procedure added.
AR-405
– 2 –
1/21/1999
No.
AR-280/285/335
AR-405
Page
Section
Content
Change
Remark
6 – 1
[6] EXTERNAL VIEW AND INTERNAL
STRUCTURE
(Refer to the attached sheet.)
6 – 7
7 – 1
7 – 4
Two illustrations for AR-405 given.
7 – 5
Separation DC component table
illustration for AR-405 given.
illustration for AR-405 given.
7 – 6
[7] – 2 – B
illustration for AR-405 given.
7 – 7
Copy mode table
Initial value changed.
[7] – 2 – C
illustration for AR-405 given.
7 – 8
illustration for AR-405 given.
[7] – 2 – D Copy mode table
illustration for AR-405 added.
7 – 22
I. RADF
Three illustrations changed.
7 – 23
One illustration, model name of RADF in the
descriptions, and the description of the load
check mode changed.
7 – 24
Continued from the above. 
9 – 1
[9]
MAINTENANCE
(New)
  ~
(Refer to the attached sheet.)
10 – 2
[10] – 3
A. OPC drum 
illustration changed.
B. Drum separation pawl
illustration changed.
10 – 3
C. Cleaner blade
illustration changed.
F. Transfer/separation charger
illustration changed.
10 – 5
illustration changed.
10 – 6
[10] – 7
7. Laser scanner unit
illustration changed.
12 – 1
[12] – 2
Image forming section correction (process
correction) operation list
Execution conditions, operation timing
Before process correction 
*1
*1
OPC drum specified rotation time (every 20,000 sec)
Immediately after correction of main charger grid
voltage (*1)
OPC drum specified rotation time (every 20,000 sec)
Immediately after correction of main charger grid
voltage (*1)
The developing bias voltage correction is made over
the specified level immediately after developing bias
voltage correction. (*1)
OPC drum specified rotation time is changed to (16,600
sec).
OPC drum specified rotation time is changed to (16,600
sec).
AR-405
1/21/1999
– 3 –
Page of 7
Display

Download Sharp AR-405 (serv.man4) Service Manual (Repair Manual)

Here you can read online and download Sharp AR-405 (serv.man4) Service Manual in PDF. AR-405 (serv.man4) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-405 (serv.man4) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-405 (serv.man4) Service Manuals

Preview DownloadPagesSize
AR-405 (serv.man3) AR405-Circuit Diagrams Service Manual 28 14.14 MB
AR-405 (serv.man5) AR405 Service Manual-Specifications Service Manual 6 66.04 KB
AR-405 (serv.man6) AR405 Service Manual-Options Service Manual 5 56.78 KB
AR-405 (serv.man7) AR405-Service Manual-Consumable Parts Service Manual 7 67.77 KB
AR-405 (serv.man8) AR405 Service Manual-External View and Internal Structure Service Manual 9 389.07 KB
AR-405 (serv.man9) AR405 Service Manual-Setting and Adjustments Service Manual 18 693.07 KB
AR-405 (serv.man10) AR405 Service Manual-Simulation Codes Service Manual 85 924.36 KB
AR-405 (serv.man11) AR405 Service Manual-Maintenance Service Manual 28 3.93 MB
AR-405 (serv.man12) AR405 Service Manual-Disassembly and Assembly Service Manual 12 1.28 MB
AR-405 (serv.man13) AR405 Service Manual-Trouble Code List Service Manual 12 79.48 KB
AR-405 (serv.man30) AR405 Operation Manual-Section 1 User Guide / Operation Manual 34 695.89 KB
AR-405 (serv.man31) AR405 Operation Manual-Section 2 User Guide / Operation Manual 64 1.52 MB
AR-405 (serv.man32) AR405 Operation Manual-Section 3 User Guide / Operation Manual 80 1.33 MB
AR-405 (serv.man14) Information of parts change Parts Guide 2 28.25 KB
AR-405 (serv.man15) Parts Guide AR250 280 285 287 335 337 405 407 505 507 Parts Guide 127 5.15 MB
AR-405 (serv.man16) AR405 Parts Guide-Exteriors Operation Panel Unit Document Size Sensor Unit Parts Guide 5 416.79 KB
AR-405 (serv.man17) AR405 Parts Guide-Optical Unit 1 Optical Unit 2 Parts Guide 5 598.66 KB
AR-405 (serv.man18) AR405 Parts Guide-Copy Lamp Unit 2nd,3rd Mirror Holder Unit Parts Guide 3 223.15 KB
AR-405 (serv.man19) AR405 Parts Guide-Frame Section Rear Frame 1 Rear Frame 2 Photo Conductor Unit Parts Guide 7 1.21 MB
AR-405 (serv.man20) AR405 Parts Guide-Toner Hopper Unit Developer Unit Fusing Unit 1 Fusing Unit 2 Parts Guide 9 728 KB
AR-405 (serv.man21) AR405 Parts Guide-1 Bin Delivery Turnover Unit 1 1 Bin Delivery Turnover Unit 2 Vertical Transport Right Door Unit Vertical Transport Unit Parts Guide 7 802.99 KB
AR-405 (serv.man22) AR405 Parts Guide-PS Transport Unit Suction Unit Main Drive Unit 1 Main Drive Unit 2 Paper Feeding Drive Unit 1 Paper Feeding Drive Unit 2 Parts Guide 8 1.06 MB
AR-405 (serv.man23) AR405 Parts Guide-DV Drive Unit Fusing Drive Unit DV Guide Unit Multi Manual Paper Feeding Unit 1 Multi Manual Paper Feeding Unit 2 Parts Guide 6 541.32 KB
AR-405 (serv.man24) AR405 Parts Guide-Waste Toner Unit Tray Paper Feeding Unit Multi Manual Paper Feeding Tray Unit MC Unit TC Unit Tray Unit Parts Guide 7 779.02 KB
AR-405 (serv.man25) AR405 Parts Guide-Packing Material Accessories PCU PWB ICU PWB Operation Control PWB Operation PWB R Operation PWB L Inverter PWB AC PWB Parts Guide 9 247.51 KB
AR-405 (serv.man26) AR405 Parts Guide-Scanner Drive PWB ORS PD PWB DC Power Supply PWB.100v DC Power Supply PWB.200v Parts Guide 7 137.31 KB
AR-405 (serv.man27) AR405 Parts Guide-RADF Exteriors RADF Transport Belt Section RADF Paper Feeding Transport Section 1 Parts Guide 7 923.97 KB
AR-405 (serv.man28) AR405 Parts Guide-RADF Paper Feeding Transport Section2 RADF Reversion Transport Section Paper Feeding Tray Section RADF PBA-Control PWB Parts Guide 8 764.96 KB
AR-405 (serv.man29) AR405 Parts Guide-Index Parts Guide 18 287.39 KB
AR-405 (serv.man2) AR405 Specifications Specification 6 218.37 KB
AR-405 (serv.man41) Change of Fuser Cover Part Number. Technical Bulletin 1 25.47 KB
AR-405 (serv.man42) Improvement made to prevent fire hazard caused by imperfect contact on fixing junction PWB. Technical Bulletin 1 45.23 KB
AR-405 (serv.man43) Re issue bulletin regarding a parts change - mainly for the mirror mount fixing plate. Technical Bulletin 4 1.6 MB
AR-405 (serv.man44) Change to the paper feed roller material. Technical Bulletin 13 1.22 MB
AR-405 (serv.man45) IMPROVEMENT MADE TO PREVENT MALFUNCTION CAUSED BY IMPERFECT CONTACT ON FIXING JUNCTION PWB. Technical Bulletin 1 106.72 KB
AR-405 (serv.man46) Reduction of F2-00 error. (Toner supply error) Technical Bulletin 2 12.33 KB
AR-405 (serv.man47) New service part for repairing a broken ADU frame Technical Bulletin 2 239.04 KB
AR-405 (serv.man48) Paper feed drive unit part change Technical Bulletin 1 30.01 KB
AR-405 (serv.man49) Corrections carried out in the parts guide (DV unit toner hopper) Technical Bulletin 2 91.78 KB
AR-405 (serv.man50) HV protect sheet addition Technical Bulletin 1 36.21 KB
AR-405 (serv.man51) Corrections made to a jamming error caused by the ADU transfer clutch dragging or slipping Technical Bulletin 1 42.95 KB
AR-405 (serv.man52) Establishment of the paper feeding drive clutch with mylar shehed as a service part Technical Bulletin 1 30.63 KB
AR-405 (serv.man53) Parts change information Technical Bulletin 1 30.59 KB
AR-405 (serv.man54) Notice of jam codes Technical Bulletin 3 58.33 KB
AR-405 (serv.man55) Supply of silicon oil used for cleaning the SPF glass to be carried out as a service part Technical Bulletin 1 30.82 KB
AR-405 (serv.man56) Copy paper jams caused by grease entering the internal section of the paper feeding drive clutch and supply of Hanari grease as a service part Technical Bulletin 1 34.59 KB
AR-405 (serv.man57) Corrections carried out in the parts guide Technical Bulletin 1 30.08 KB
AR-405 (serv.man58) Change carried out in the material of the reversion gate Technical Bulletin 1 29.82 KB
AR-405 (serv.man59) Establishent of the CG reverse roller shaft UN and the Reverse roller shaft UN in the 550 paper feeding unit as service parts Technical Bulletin 2 52.22 KB
AR-405 (serv.man60) Parts change information Technical Bulletin 4 140.64 KB
AR-405 (serv.man61) Correction carried out in the parts guide for the charger wire Technical Bulletin 1 19.22 KB
AR-405 (serv.man62) Part changes Technical Bulletin 1 33.26 KB
AR-405 (serv.man63) Improvement of paper jam udulation caused by hardening of the delivery roller Technical Bulletin 1 22.14 KB
AR-405 (serv.man64) Notice of jam cause codes Technical Bulletin 3 153.47 KB
AR-405 (serv.man65) Providing a caution label, as a service part, on adding toner Technical Bulletin 2 70.58 KB
AR-405 (serv.man66) Using the same hand-feed pick-up roller as the 550 paper-feeding unit Technical Bulletin 1 29.8 KB
AR-405 (serv.man67) Change of the cleaning blade Technical Bulletin 1 34.61 KB
AR-405 (serv.man68) Parts change information Technical Bulletin 1 30.89 KB
AR-405 (serv.man69) Parts change information Technical Bulletin 3 139.49 KB
AR-405 (serv.man70) Polygon motors for laser units. Technical Bulletin 1 20.68 KB
AR-405 (serv.man71) Change of pulley fixing double-thread screw and discontinued M4 tap. Technical Bulletin 1 85.91 KB
AR-405 (serv.man72) Change carried out in the hopper seal of the developing tank. Technical Bulletin 6 213.68 KB
AR-405 (serv.man73) Change of parts used in 550 paper feeding unit. Technical Bulletin 2 123.9 KB
AR-405 (serv.man74) Problem with main drive unit paper feed clutch. Technical Bulletin 3 1.18 MB
AR-405 (serv.man75) Addition of explanatory label for lever operation and change of suction lift shaft. Technical Bulletin 1 120.75 KB
AR-405 (serv.man76) Measure to alleviate problems of disengagement of the side plate in the machine cassette unit. Technical Bulletin 2 124.61 KB
AR-405 (serv.man77) ICU PWB part number change. Technical Bulletin 1 74.42 KB
AR-405 (serv.man78) Action to alleviate problems of static electricity through the use of a plastic bag for the machine. Technical Bulletin 1 72.63 KB
AR-405 (serv.man79) Abnormal noise from process unit. Technical Bulletin 1 60.53 KB
AR-405 (serv.man80) Part change information. Technical Bulletin 2 160 KB
AR-405 (serv.man81) Unification of 200V series DC power unit. (WHITE) Technical Bulletin 2 91.96 KB
AR-405 (serv.man82) Change of supplier for sintered bearings. (WHITE) Technical Bulletin 4 188.55 KB
AR-405 (serv.man83) Change of touch panel. (WHITE) Technical Bulletin 1 86.85 KB
AR-405 (serv.man84) Changes to the AR505 Service Manual and addition of jam cause codes. (WHITE) Technical Bulletin 5 323.55 KB
AR-405 (serv.man85) Change carried out in the original document detection photo sensor. (WHITE) Technical Bulletin 1 73.94 KB
AR-405 (serv.man86) Change carried out in the paper feeding drive frame and the transport clutch. (WHITE) Technical Bulletin 2 119.36 KB
AR-405 (serv.man87) Change carried out in the PS front roller bearing. (WHITE) Technical Bulletin 1 83.44 KB
AR-405 (serv.man88) Change carried out in the waste toner drive gear in the main drive unit. (WHITE) Technical Bulletin 1 83.58 KB
AR-405 (serv.man89) Measure to alleviate problems of snagging the copy keys on the operation panel. (YELLOW) Technical Bulletin 1 61.14 KB
AR-405 (serv.man90) Change carried out in the maker of the table glass used in the RADF. (WHITE) Technical Bulletin 2 116.81 KB
AR-405 (serv.man91) Action to alleviate problems of dislocation of the disfunction arm in the ADU unit. (WHITE) Technical Bulletin 1 83.85 KB
AR-405 (serv.man92) Change carried out in the location of production of the LSU unit. (WHITE) Technical Bulletin 1 88.01 KB
AR-405 (serv.man93) Discontinuance of the adjustment plate in the CCD unit. (WHITE) Technical Bulletin 1 133.8 KB
AR-405 (serv.man94) Countermeasure against Z-folding and paper mis-feed. (WHITE) Technical Bulletin 4 552.17 KB
AR-405 (serv.man95) Change carried out in the attachment screws for the operation panel LCD. (WHITE) Technical Bulletin 1 136.4 KB
AR-405 (serv.man96) Measure to improve the performance of the copy lamp. (WHITE) Technical Bulletin 1 114.6 KB
AR-405 (serv.man97) Change carried out in the shape of the bushing and the attachment gear in the paper-feeding drive unit. (WHITE) Technical Bulletin 2 137.66 KB
AR-405 (serv.man98) Change in shape of the TC holder R. (WHITE) Technical Bulletin 1 121.34 KB
AR-405 (serv.man99) Discontinuance of the adjustment plate in the CCD unit. (WHITE) Technical Bulletin 1 139.91 KB
AR-405 (serv.man100) Report of flash memory version method. (WHITE) Technical Bulletin 3 130.58 KB
AR-405 (serv.man101) Marks on the rear frame of copies, ghosting on the rear frame of copies. (WHITE) Technical Bulletin 1 89.71 KB
AR-405 (serv.man102) Fixing ARPB2 F9 00 error messages. (WHITE) Technical Bulletin 2 96.34 KB
AR-405 (serv.man103) Corrections to the Service Manual. (WHITE) Technical Bulletin 3 181.37 KB
AR-405 (serv.man104) Change carried out in the synchronous detection PWB in the LSU. (WHITE) Technical Bulletin 1 95.19 KB
AR-405 (serv.man105) 1.Change carried out in the stir plate of the developing tank unit. 2.Change carried out in the material used for the TX sheet in the toner hopper unit. (WHITE) Technical Bulletin 3 156.25 KB
AR-405 (serv.man106) Change Of Parts To Diminish The Noise From The Polygon Motor. (WHITE) Technical Bulletin 1 38.82 KB
AR-405 (serv.man107) 1.Change Carried Out In The Plastic Slider Washer In The ADU Unit. 2.Action To Alleviate Problems Of Static Electricity In The OP Control PWB Unit. (WHITE) Technical Bulletin 2 157.93 KB
AR-405 (serv.man108) Report Of Flash Memory Version Method. (WHITE) Technical Bulletin 2 127.96 KB
AR-405 (serv.man109) 1.Correction Of Screws In The Scanner Unit. 2.Addition Carried Out Of A Harness Protect Sheet S. (WHITE) Technical Bulletin 2 161.5 KB
AR-405 (serv.man110) ROM Version Upgrade (Control No.7). (WHITE) Technical Bulletin 1 58.4 KB
AR-405 (serv.man111) Length Change Of SP Tube. (WHITE) Technical Bulletin 1 63.22 KB
AR-405 (serv.man112) 1.Change Of The ICU PWB Unit At EFI's Request. 2.Change Of The Touch Panel Manufacturer. 3.Change Of The Heat-resistant Clamp Fixing Screws In The Fusing Unit. 4.Change Of The Action Time Changing The ICU PWB Memory To SDRAM. (WHITE) Technical Bulletin 3 87.22 KB
AR-405 (serv.man113) Extension Of The Rib On The Rail Section Of The 550-Tray Case. (WHITE) Technical Bulletin 2 90.29 KB
AR-405 (serv.man114) Corrections Carried Out In The Parts Guide. (WHITE) Technical Bulletin 7 292.04 KB
AR-405 (serv.man115) 1.Increase Of The DC Power Supply Capacity. 2.Change Of The Memory On the ICU PWB To SDRAM. 3.Change Of The Installation Procedure Manual And Addition Of Wire Saddle. (WHITE) Technical Bulletin 2 109.26 KB
AR-405 (serv.man116) 1.Satisfaction Of The Argentine Safety Standard. 2.Increase Of Strength Of The Boss On The Right End Of The RSPF Base. 3.Removal Of The RSPF Upper Guide Plate Holes And Addition Of The Delivery Paper Guide Positioner. (WHITE) Technical Bulletin 2 100.29 KB
AR-405 (serv.man117) 1.Points Of Caution To Be Observed During Maintenance Operations Of The Fusing Unit. 2.ROM Writer Functions For The ICU PWB. (WHITE) Technical Bulletin 2 77.3 KB
AR-405 (serv.man118) Change Carried Out In The Hard Disk. (WHITE) Technical Bulletin 2 116.42 KB
AR-405 (serv.man119) 1.Change Carried Out In The Main Harness. 2.Change Carried Out In The Spring Of The Multi Manual Unit. (WHITE) Technical Bulletin 2 78.44 KB
AR-405 (serv.man120) 1.Change Carried Out In The Bearings In The Paper Feeding Drive Unit. 2.Discontinuance Of The Manual Pressure Spring Attachment Plate. (WHITE) Technical Bulletin 2 79.01 KB
AR-405 (serv.man121) Change Carried Out In The Shape Of The AC Harness Cover. (WHITE) Technical Bulletin 2 76.14 KB
AR-405 (serv.man122) Report Of Flash Memory Version Method. (WHITE) Technical Bulletin 8 330.52 KB
AR-405 (serv.man123) Report Of Flash Memory Version Method. (WHITE) Technical Bulletin 6 133.49 KB
AR-405 (serv.man124) 1.Change To The Attachment Screws Of The Optical Reception PWB Holder. 2.Measure To Alleviate Problems Of Electrical Noise In The ICU PWB. (WHITE) Technical Bulletin 2 110.67 KB
AR-405 (serv.man125) 1.Parts Change To Incorporate Parts Manufactured By Sharp Into Assembled Units (Productivity Improvement). 2.Measure To Establish Uniformity Of The High Voltage PWB (To Improve Productivity). 3.Parts Change Carried Out In Accordance With A Change To In-house Production Of The LSU Unit. 4.Measure To Establish Uniformity Of The PCU PWB To Improve Productivity. 5.Measure To Alleviate Problems Of Scattering Of The Waste Toner. (WHITE) Technical Bulletin 1 69.79 KB
AR-405 (serv.man126) Change In The Magnetic Clutch Of The Paper Feeding Unit In The 500 Tray To Improve Productivity. (WHITE) Technical Bulletin 2 103.1 KB
AR-405 (serv.man127) 1.Change In The Height Of The ADU Opening And Closing PG Boss. 2.Change In The PG Quantity Of The Paper Feeding Desk. (WHITE) Technical Bulletin 4 164.31 KB
AR-405 (serv.man128) Correction Measure Carried Out To Allevaite Problems Of Diagonal Feeding Which Occurred During Copy Operations Using The ADF. (WHITE) Technical Bulletin 1 66.21 KB
AR-405 (serv.man129) Measure To Alleviate Problems Of Improperly Tightened Screws In The Paper Delivery Reversion Unit. (YELLOW) Technical Bulletin 1 59.72 KB
AR-405 (serv.man130) 1.Action Carried Out As A Measure To Improve The Precision Of The Diameter Of The PS Roller. 2.Addition Of An Edge Guide Sheet. 3.Addition Of A Caution Label Concerning The Laser In The LSU Unit. (WHITE) Technical Bulletin 3 84.29 KB
AR-405 (serv.man131) 1.Change Carried Out In The Assembly Contractor Of The Toner Hopper And Developing Unit. 2.Measure Carried Out To Protect The Main Developing Unit. 3.Measure To Improve The Alignment Performance Of The Waste Toner Transport Gear. 4.Measure To Diminish Abnormal Noise Which Occurs In The Paper Delivery Reversion No. 2 Bin Unit. (WHITE) Technical Bulletin 5 136.81 KB
AR-405 (serv.man132) Report Of Flash Memory Version Method. (WHITE) Technical Bulletin 6 107.72 KB
AR-405 (serv.man133) Fast Facts 96-Firmware upgrade for AR405 Technical Bulletin 1 6.51 KB
AR-405 (serv.man134) 1.Change In The Shape Of The Attachment Plate Of The AC PWB (To Improve Productivity). 2.In-house Production Of the Operation Manuals (To Improve Productivity). (WHITE) Technical Bulletin 2 45.13 KB
AR-405 (serv.man135) 1.Discontinuance Of The Plastic Sliders Used In The Developing Unit (To Improve Productivity). 2.Establishment Of Uniformity Of The Upper Cabinet Rear (To Improve Productivity). 3.Change In The Maker Of The Drive Unit Clutch (To Improve Productivity). 4.Discontinuance Of The Boss In The Fusing Unit (To Improve Productivity). (WHITE) Technical Bulletin 3 53.91 KB
AR-405 (serv.man136) AR405 335 285 280 and AR-DU1, Frame strengthening. Previously sent out as Fast Fact 94 Technical Bulletin 1 6.28 KB
AR-405 (serv.man36) ASPI Update and Check Utility Driver / Update 1.94 MB
AR-405 (serv.man37) Flash 5.1 Download Utility Driver / Update 16.94 KB
AR-405 (serv.man38) AR405 PCU Firmware 2.07 Driver / Update 796.07 KB
AR-405 (serv.man39) AR405 ICU Firmware 2.12 Driver / Update 979.15 KB
AR-405 (serv.man40) AR405 OPE Firmware 2.06 Driver / Update 1.27 MB
AR-405 Cougar Handy Guide (Updated March'02) Handy Guide 54 218.68 KB
AR-405 (serv.man33) Service Exchange Scheme Request Form (TP ServiceCo) FAQ 1 7.68 KB
AR-405 (serv.man34) Cougar Firmware Revision Table FAQ 6 19.71 KB
AR-405 (serv.man35) AR280 285 335 405 Jam Map Listing FAQ 2 5.3 KB
AR-405 (serv.man137) MSDS F-00871 Regulatory Data 2 194.68 KB
AR-405 (serv.man138) MSDS F-00881 Regulatory Data 2 195.14 KB
AR-405 (serv.man139) Environmental Data Sheet Regulatory Data 1 5.76 KB
AR-405 (serv.man140) MSDS F-30881 Regulatory Data 2 178 KB
AR-405 (serv.man141) MSDS F-30871 Regulatory Data 2 180.8 KB

Random: