Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual online
MX-7000N SIMULATION 7 – 17
6-2
Purpose
Operation test/Check
Function (Purpose) Used to check the operations of each fan
motor and its control circuit.
Section
Other
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel.
2)
Press [EXECUTE] key.
The selected load is operated.
When [EXECUTE] is pressed, the operation is stopped.
The selected load is operated.
When [EXECUTE] is pressed, the operation is stopped.
6-3
Purpose
Operation test/Check
Function (Purpose) Used to check the operations of the primary
transfer unit and the control circuit.
Section
Process (Transfer)
Operation/Procedure
Select [NORMAL] or [REVERSE] and press [EXECUTE] key.
The load operation is started. (Separation operation is changed in
the sequence of BLACK
Select [NORMAL] or [REVERSE] and press [EXECUTE] key.
The load operation is started. (Separation operation is changed in
the sequence of BLACK
→ COLOR → FREE, and the operation is
halted for 5 sec at each position. For REVERSE. However, the
operation is reversed.)
During this period, the current position is displayed.
operation is reversed.)
During this period, the current position is displayed.
6-4
Purpose
Operation test/Check
Function (Purpose) Used to check the operations of the PTC
and the MC cleaner.
Section
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel.
2)
Press [EXECUTE] key.
7
7-1
Purpose
Setting
Function (Purpose) Used to set the operating conditions of
aging.
Section
Other
Operation/Procedure
1)
1)
Select a target to be set with the touch panel key.
2)
Press [EXECUTE] key.
The machine is rebooted in the aging mode.
Afterward, the operation mode is kept until the power is tuned
off or resetting is made.
The machine is rebooted in the aging mode.
Afterward, the operation mode is kept until the power is tuned
off or resetting is made.
POFM
Paper exit cooling fan motor 1
Paper exit cooling fan motor 2
Paper exit cooling fan motor 2
OZFM
Ozone exhaust fan motor 1
Ozone exhaust fan motor 2
Ozone exhaust fan motor 3
Ozone exhaust fan motor 2
Ozone exhaust fan motor 3
PSFM
Power cooling fan motor 1
Power cooling fan motor 2
Power cooling fan motor 2
LSUFM
LSU cooling fan motor
FUFM
Fusing exhaust fan motor
Fusing fan cooling motor
Fusing fan cooling motor
CFM
Charger cooling fan motor
CONFM
Controller cooling fan motor / HDD cooling fan motor
VFM_C
Main inside ventilation fan motor (center)
VFM_R
Main inside ventilation fan motor (right)
NORMAL
BLACK
Black mode
position
position
COLOR
Color mode
position
position
FREE
Drum
separation
position
separation
position
REVERSE
BLACK
Black mode
position
position
FREE
Drum
separation
position
separation
position
COLOR
Color mode
position
position
SIMULATION NO.06-02
TEST
FAN LOAD SETUP
CLOSE
EXECUTE
1/1
POFM
OZFM
PSFM
LSUFM
FUFM
CFM
VFM_C
CONFM
VFM_R
ALL
Black mode position
Color mode position
Drum separation position
The operation
is repeated.
is repeated.
Black mode position
Drum separation position
Color mode position
The operation
is repeated.
is repeated.
AGING
Aging operation setup
INTERVAL
Intermittent setup
MISFEED DISABLE
JAM detection enable/disable setup
FUSING DISABLE
Fusing operation enable/disable setup
WARMUP DISABLE
Warm-up disable setup
DV CHECK DISABLE
DV unit detection enable/disable setup
SHADING DISABLE
Shading disable setup
CCD GAIN FREE
CCD gain adjustment free setup
SIMULATION NO.06-03
TEST
TRANSFER LOAD CHECK
EXECUTE
POSITION
:
1/1
CLOSE
REVERSE
NORMAL
SIMULATION NO.06-04
TEST
PTC/MC CLEANING
CLOSE
MC COUNT
: 0
EXECUTE
PTC
MC
ALL
PTC COUNT : 0
SIMULATION NO.07-01
TEST
AGING TEST SETTING
AGING
INTERVAL
MISFEED DISABLE
FUSING DISABLE
WARMUP DISABLE
DV CHECK DISABLE
1/1
EXECUTE
SHADING DISABLE
CCD GAIN FREE
CLOSE
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man46) service manuals if exist.