Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man33) Peripheral online
MX-7000N MX-LCX3 3 – 5
a. When the height is properly adjusted:
When both the edges of the connecting plates on front and
rear are fit with the longest mark on the mounting plates each,
install the positioning plates (Package part No. 4) to the front
and the rear sides and fix them with the fixing screw B (Pack-
age part No. 7) (1 for each side).
Front side
When both the edges of the connecting plates on front and
rear are fit with the longest mark on the mounting plates each,
install the positioning plates (Package part No. 4) to the front
and the rear sides and fix them with the fixing screw B (Pack-
age part No. 7) (1 for each side).
Front side
Rear side
b. When the height is not properly adjusted:
Use the adjustment device on the lower left side of the LCC to
adjust the height of the left caster section.
Front side
Use the adjustment device on the lower left side of the LCC to
adjust the height of the left caster section.
Front side
Rear side
<1>
Loosen the hex washer based screws on the both ends of the
caster movable plate in the front and the rear sides.
Loosen the hex washer based screws on the both ends of the
caster movable plate in the front and the rear sides.
F
R
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man33) service manuals if exist.